Before Use-72-Power Supplyª Using the AC Adaptor1 Connect the DC Input Lead to theMovie Camera.2 Connect the DC Input Lead to theAC Adaptor.3 Connect the AC Mains Lead to theAC Adaptor and the AC mainssocket.≥The AC Mains Lead’s outlet plugdoes not fit entirely into the ACAdaptor socket. A gap will remain asshown 1.≥Before connecting or disconnectingthe power supply, set the[OFF/ON/MODE] Switch on theMovie Camera to [OFF] and makesure that [CAMERA/VCR/CARD PB]Lamps are not lit.ª Using the BatteryBefore use, fully charge the Battery.1 Attach the Battery to the ACAdaptor and charge it.≥Since the Battery will not be chargedwhen the DC Input Lead isconnected to the AC Adaptor,disconnect it from the AC Adaptor.≥The [POWER] Lamp and [CHARGE]Lamp lights up, and charging starts.≥When the [CHARGE] Lamp goes off,charging is completed.12 Attach the charged Battery to theMovie Camera.Disconnecting the Power SourceSet the [OFF/ON/MODE] Switch (43) to[OFF] and, while pressing the[PUSH BATT] Button (50), slide theBattery or DC Input Lead upward todisconnect it.≥For other notes concerning this item,see -120-.Charging Time and AvailableRecording TimeA Charging TimeB Maximum Continuous RecordingTimeC Intermittent Recording Time(Intermittent Recording Time is theavailable recording time with repeatedrecording and stopping actions.)“1h10min.” indicates 1 hour and 10minutes.≥Battery CGA-DU07 is supplied.≥The times shown in the table areapproximate times. The numbers inparentheses indicate the recordingtime when the LCD Monitor is used. Inactual use, the available recording timemay be shorter.CGA-DU07 A 1h30min.B 2h15min.(1h35min.)C 1h10min.(50min.)CGA-DU14 A 2h45min.B 4h30min.(3h10min.)C 2h15min.(1h35min.)CGA-DU21 A 3h55min.B 6h45min.(4h45min.)C 3h25min.(2h25min.)PUSHBATTOFFONMODE(50)(43)