Panasonic NV-GS50EN Operating Instructions Manual

Also see for NV-GS50EN: Service manual Service manual Service manual

Contents

VCR Mode-94-VCR ModePlaying BackThe recorded scene can be played backimmediately after the recording.1 Rotate the [OFF/ON/MODE] Switch(43) and set the Movie Camera tothe VCR Mode.≥The [VCR] Lamp (45) lights up.2 Press the [6] Button (7) to rewindthe tape.≥Rewind the tape to the point whereyou want to start playback.≥When the tape reaches thebeginning, rewinding stopsautomatically.3 Press the [1] Button (8) to startplayback.≥The [!] Indication appears.To Stop PlaybackPress the [∫] Button (12).ª Adjusting the Sound VolumeUntil the [VOLUME] Indication appears,keep pressing the [PUSH] Dial (38).Then, turn the [PUSH] Dial to adjust thevolume. After the adjustment, press theCAMERAVCRCARDPBOFFONMODE(43)(45)SEARCH(7)BACKLIGHT(8)(12) FADE[PUSH] Dial to make the [VOLUME]Indication disappear.To adjust the volume with the RemoteController, press the [T] or [W] Button todisplay the [VOLUME] Indication. Pressthe [T] Button to increase the volume orpress the [W] Button to decrease thevolume. The [VOLUME] Indication goesoff a few seconds after the adjustment isfinished.≥The sound volume cannot be adjustedusing the Remote Controller inPlayback Zoom Mode. (-97-)≥If a cassette recorded with a copyrightprotection signal is played back, thepicture is distorted by mosaic-likepatterns.≥For other notes concerning this item,see -124-.Finding a Scene You Want toPlay Backª Cue/Review PlaybackIf the [5] Button (9) or [6] Button(7) is pressed during Playback, it turns toCue Playback A or Review Playback B.≥If the Button is held continuously, itturns to Cue Playback or ReviewPlayback until you release it.PUSHMF/VOL/JOGWB/SHUTTER/IRIS/(38)SEARCH SEARCHBACKLIGHT(7) (9)A B