Panasonic PT-VW340Z Operating Instructions Manual

Also see for PT-VW340Z: Operating instructions (functional manual)Specifications Operating instructions

Contents

Panasonic PT-VW340Z Operating Instructions Manual Manual pdf 19 page image

Start-up displayWhen the projector is switched on for the first time after purchase as well as when [INITIALIZE ALL] is executed in the[PROJECTOR SETUP] menu, then the initial setting screen is displayed. Set them in accordance with circumstances.In other occasions, you can change the settings by menu operations.Initial setting (display language)Select the language to show on the screen.Press1) asqw to select the display language.Press the button to proceed to the initial setting.2)Initial setting (projector setup)Set each item.Press1) as to select an item.Press2) qw to switch the setting.[PROJECTION METHOD] (f Æpage 67)[SCREEN FORMAT] (Only for PT-VW340Zf Æpage 62)[SCREEN POSITION] (Only for PT-VW340Zf Æpage 62)[HIGH ALTITUDE MODE] (f Æpage 67)Press the button.3)Confirm the setting value and complete the initial setting.fNoteIf you press the button on the initial setting screen, you can go back to the previous screen.fTo continue operations after completed the initial settings, refer to “Selecting the input signal” (f Æpage 38).PT-VW340Z PT-VX410ZENGLISH - 19Chapter 1 Preparation - Start-up display