NoteCertain signals may not be adjustable.fOptimal value may not be achieved if the output from the input computer is unstable.fTo project a signal with dot clock frequency with 162 MHz or higher, noise may not disappear even if [CLOCK PHASE] isfadjusted.[CLOCK PHASE] cannot be adjusted when a digital signal is input.f[OVER SCAN]Use this function when characters or pictures are cropped near the periphery of the projected image.Press1) as to select [OVER SCAN].Press2) qw or the button.The [OVER SCAN] individual adjustment screen is displayed.fPress3) qw to adjust the level.The adjustment value are 0 to +3.fNoteIt is unavailable for still image signals, HDMI signals and [NETWORK].f[ASPECT]You can switch the aspect ratio of the image.The aspect ratio is switched within the screen range selected in [SCREEN SETTING]. Set [SCREEN SETTING] first.(Æ page 62)[SCREEN SETTING] is only for PT-VW340Z.Press1) as to select [ASPECT].Press2) qw or the button.The [ASPECT] individual adjustment screen is displayed.fPress3) qw to switch the item.The items will switch each time you press the button.f[NORMAL] Displays images without changing the aspect ratio of the input signals.[AUTO]*1 The aspect ratio is automatically switched to the optimum aspect ratio when an aspect ratio identifier isincluded in the input signal.[WIDE] Displays images with the aspect ratio converted to 16:9 when standard signals*2 are input.Display images without changing the aspect ratio when wide-screen signals*3 are input.[H FIT]Displays images using the entire width of the screen. When signals have the aspect ratio vertically longer thanthe aspect ratio of the screen selected in [SCREEN FORMAT]*4, the images are displayed with the top andbottom parts cut off.[V FIT]Displays the height of the panel pixels vertically without changing the aspect ratio when wide-screen signalsare input. When signals have the aspect ratio horizontally longer than the aspect ratio of the screen, theimages are displayed with the right and left parts cut off.[FULL] The image is projected using all the panel (screen) pixels. The input signals are converted to the aspect ratioof the panel (screen).[NATIVE] Displays images without changing the resolution of the input signals.Only for Video (NTSC) and 480i (YC*1 BCR) signals inputStandard signals are input signals with an aspect ratio of 4:3 or 5:4.*2Wide-screen signals are input signals with an aspect ratio of 16:10, 16:9 or 15:9.*3[SCREEN FORMAT] is only for PT-VW340Z.*4ENGLISH - 57Chapter 4 Settings - [POSITION] menu
