NotePressing the fSome items may not be adjusted or used for certain signal formats to be input to the projector. The menu items that cannotfbe adjusted or used are shown in gray characters, and they cannot be selected. [DIGITAL CINEMA REALITY] and [FRAMELOCK] may not be displayed depending on the input signal.Some items can be adjusted even if signals are not input.fIndividual adjustment screen is cleared automatically if no operation is performed for approximately five seconds.fFor menu items, refer to “Main menu” (f Æpage 46) and “Sub-menu” (Æpage 47).Resetting adjustment values to the factory defaultIf the button on the remote control is pressed, the values adjusted in the menu items are restored to the factorydefault settings.buttonPress the button on the remote control.1)NoteYou cannot reset all the settings to the factory default at a time.fTo reset all the settings adjusted in the sub-menu item to the factory default one at a time, execute [PROJECTOR SETUP]fmenu → [INITIALIZE ALL] (Æ page 72).Some items cannot be reset by pressing the button. Adjust each item manually.fMain menuThe main menu consists of the following 7 menu items.When a main menu item is selected, the screen changes to a submenu selection screen.Main-menu item Page[PICTURE] 49[POSITION] 54[LANGUAGE] 59[DISPLAY OPTION] 60[PROJECTOR SETUP] 66[SECURITY] 73[NETWORK] 7646 - ENGLISHChapter 4 Settings - Menu Navigation
