Panasonic PT-VW340Z Operating Instructions Manual

Also see for PT-VW340Z: Operating instructions (functional manual)Specifications Operating instructions

Contents

Panasonic PT-VW340Z Operating Instructions Manual Manual pdf 77 page image

[NAME CHANGE]You can change the projector name, for example, when using the DHCP server.Press1) as to select [NAME CHANGE].Press the button.2)The [NAME CHANGE] screen is displayed.fSelect characters with the3) asqw buttons and press the button to enter the projectorname.Select [ALL DELETE] to delete all the entered characters, or press the button on the remote control tofdelete a character on the cursor in the entry field.Select [OK] with the4) as buttons and press the button.To cancel the change of the name, select [CANCEL] and press the button.fNote[Namef ] ( is 4-digit number) is set before the projector leaves the factory.[NETWORK CONTROL]Set when you want to control the projector from a computer connected to the network.Press1) as to select [NETWORK CONTROL].Press2) qw to switch the item.The items will switch each time you press the button.f[ON] This function is enabled. Web control, PJLink control, the command control of the LAN are enabled.[OFF] This function is disabled.[AMX D. D.]Set to [ON] to control with the controller of AMX Corporation.Setting this function to [ON] enables detection through “AMX Device Discovery”. For details, refer to the website of AMXCorporation.URL http://www.amx.com/Press1) as to select [AMX D. D.]Press2) qw to switch the item.The items will switch each time you press the button.f[ON] This function is enabled.[OFF] This function is disabled.[Crestron Connected(TM)]Set to [ON] to control with Crestron Connected™ of Crestron Electronics, Inc.Press1) as to select [Crestron Connected(TM)].Press2) qw to switch the item.The items will switch each time you press the button.f[ON] This function is enabled.[OFF] This function is disabled.ENGLISH - 77Chapter 4 Settings - [NETWORK] menu