Panasonic PT-VW340Z Operating Instructions Manual

Also see for PT-VW340Z: Operating instructions (functional manual)Specifications Operating instructions

Contents

Panasonic PT-VW340Z Operating Instructions Manual Manual pdf 95 page image

ReplacementBefore performing maintenance/replacementWhen you perform maintenance or replacement of the parts, make sure to turn off the power and disconnect the power plugffrom the wall outlet. (Æ pages 34, 37)Be sure to observe the procedure “f Powering Off the projector” (Æ page 37) when performing power supply operation.MaintenanceOuter CaseWipe off dirt and dust using a soft dry cloth.If the dirt is persistent, soak the cloth with water and wring it thoroughly before wiping. Dry off the projector with a dry cloth.fDo not use benzene, thinner, or rubbing alcohol, other solvents, household cleaners. Using them may cause deterioration offthe outer case.When using chemical treated dusters, follow its instruction.fFront glass surface of the lensWipe off the dirt and dust off the front surface of the lens with soft clean cloth.Do not use a cloth that has an abrasive surface or a cloth that is moist, oily, or covered with dust.fDo not use excessive force when wiping the lens as it is fragile.fAttentionThe lens is made of glass. Impacts or excessive force when wiping may scratch its surface.fPlease handle with care.Replacing the unitAir filter unitThe air filter prevents dust from accumulating on the optical elements inside the projector. Should the air filter become cloggedwith dust particles, it will reduce cooling fans’ effectiveness and may result in internal heat buildup and adversely affect the lifeof the projector.If the air filter unit become clogged, it will result in internal heat buildup, the power of the projector may be turned off for safety.If a warning message appears on the screen, replace the air filter immediately.Consult your dealer to purchase a replacement air filter unit (ET-RFV300).Removing the air filter unitRemove the air filter cover. (Fig.1)1)Open the air filter cover in the direction of the arrow and remove it.fRemove the air filter unit.2)Hold the tab of the air filter unit and pull out in the direction of the arrow. (Fig.2)fAfter removing the air filter unit, remove foreign objects and dust from the air filter compartment and the projector’s airfintake port if there are any.Fig.1 Air filter coverAir filter unitTabFig.2ENGLISH - 95Chapter 5 Maintenance - Replacement