NoteThe image size may be switched abnormally when [AUTO] is selected, please set to [NORMAL] or [WIDE] according to thefinput signal.Some size modes are not available for certain types of input signals.fIf an aspect ratio which is different from the aspect ratio for the input signals is selected, the images will appear differentlyffrom the originals. Be careful of this when selecting the aspect ratio.If using the projector in places such as cafes or hotels to display programs for a commercial purpose or for publicfpresentation, note that adjusting the aspect ratio or using the zoom function to change the screen images may be aninfringement of the rights of the original copyright owner for that program under copyright protection laws. Take care whenusing a function of the projector such as the aspect ratio adjustment and zoom function.If conventional (normal) 4:3 images which are not wide-screen images are displayed on a wide screen, the edges of thefimages may not be visible or they may become distorted. Such images should be viewed as with an aspect ratio of 4:3 in theoriginal format intended by the creator of the images.[FRAME LOCK](Only for still image signals input)This setting is available for specific computer signals. Set when the movie is distorted.Press1) as to select [FRAME LOCK].Press2) qw or the button.The [FRAME LOCK] individual adjustment screen is displayed.fPress3) qw to switch the [FRAME LOCK].The items will switch each time you press the button.f[OFF] Disables the frame lock.[ON] Enables the frame lock.58 - ENGLISHChapter 4 Settings - [POSITION] menu
