[PICTURE] menuOn the menu screen, select [PICTURE] from the main menu, and select an item from the submenu.Refer to "Navigating through the menu" (xpage 45) for the operation of the menu screen.After selecting the item, press asqw to set.[PICTURE MODE]You can switch to the desired picture mode suitable for the image source and the environment in which the projector is used.Press1) as to select [PICTURE MODE].Press2) qw or the button.The [PICTURE MODE] individual adjustment screen is displayed.fPress3) qw to switch the item.The items will switch each time you press the button.f[STANDARD] The picture becomes suitable for moving images in general.[DYNAMIC] The light output is maximized for use in bright areas.[BLACKBOARD] The picture becomes suitable for projecting on a black board.[WHITE BOARD] The picture becomes suitable for projecting on a white board.[CINEMA]*1 The picture becomes suitable for movie sources.[NATURAL]*2 The picture complies with sRGB.Only for the movie-based signals.*1Only for the still image signals.*2NoteThe factory default picture mode is [DYNAMIC] for still image input signals and [STANDARD] for movie-based input signals.fsRGB is an international standard (IEC61966-2-1) for color reproduction defined by IEC (International ElectrotechnicalfCommission).[CONTRAST]You can adjust the contrast of the colors.Press1) as to select [CONTRAST].Press2) qw or the button.The [CONTRAST] individual adjustment screen is displayed.fPress3) qw to adjust the level.Operation Adjustment Adjustment rangePress the ► button. Brightens the screen and makes the color deeper. -32 ~ +32Press the ◄ button. Darkens the screen and makes the color lighter.AttentionAdjust [BRIGHTNESS] first when you need to adjust [BRIGHTNESS] and [CONTRAST].fENGLISH - 49Chapter 4 Settings - [PICTURE] menu