Panasonic PT-VW340Z Operating Instructions Manual

Also see for PT-VW340Z: Operating instructions (functional manual)Specifications Operating instructions

Contents

Panasonic PT-VW340Z Operating Instructions Manual Manual pdf 56 page image

[SHIFT](Only for computer signal input)Move the image position vertically or horizontally if the image position projected on the screen is shifted even when the relativeposition of the projector and the screen is installed correctly.Press1) as to select [SHIFT].Press the button.2)The [SHIFT] screen is displayed.fPress3) asqw to adjust the position.Orientation Operation AdjustmentVertical (up and down)adjustment.Press the a button. The image position moves up.Press the s button. The image position moves down.Horizontal (right and left)adjustment.Press the w button. The image position moves to theright.Press the q button. The image position moves to theleft.[DOT CLOCK](Only for still image computer (RGB) signals input)Use this function to adjust and minimize the effect of interference caused by projection of patterns consisting of vertical stripes.The projection of the following striped pattern may cause cyclic patterns (noise). Adjust so that the amount of interference is ata minimum. You can adjust the dot lock of image.Press1) as to select [DOT CLOCK].Press2) qw or the button.The [DOT CLOCK] individual adjustment screen is displayed.fPress3) qw to adjust the value.The adjustment value are -32 to +32.fAttentionSet it before adjusting [CLOCK PHASE].f[CLOCK PHASE](Only for computer (RGB) signals input)You can adjust to achieve an optimal image when there is a flickering image or smeared outlines.Press1) as to select [CLOCK PHASE].Press2) qw or the button.The [CLOCK PHASE] individual adjustment screen is displayed.fPress3) qw to adjust the value.The adjustment values are -16 to +16. Adjust so that the amount of interference is at a minimum.f56 - ENGLISHChapter 4 Settings - [POSITION] menu