Adjusting the projected image via EASY SETTING functionEASY SETTING function makes the semi-automatically adjustment possible, so that to get the optimal image.EASY SETTING function including these following setting items:[FOCUS ASSIST] The color and the length of the bar assists the focus adjustment.[SCREEN FIT] Detect and correct the image automatically to fit the frame. If you can not detect the frame of thescreen, Keystone executes automatically.[COLORBOARD] The color values will change automatically to reach the optimal white balance according to thecolor of screen.Executing the EASY SETTING functionWhen all of the above mentioned functions are set to [ON] (However, [SCREEN FIT] is set to [FULL] or [ORIGINAL]), theadjustment orders are as follows.1) Project an image.2) Adjust the zoom ring so that the image is larger than the screen frame.3) Press the button on the control panel during projection.f A test pattern for [FOCUS ASSIST] appears on the screen and the focus assist bar appears in the center bottom of thescreen.4) Rotate the focus ring until the bar changes to the maximum level.f The focus assist bar will display different colors and different lengths according to the clarity of image.Color State Length StateRed The projected image is turning unclear. Short The projected image is shifting greatly.Yellow The projected image is turning clear. Long The projected image is shifting slightly.Blue The projected image is optimal. Maximumlength The projected image is optimal.Attentionf When the EASY SETTING function is started, the focus assist bar does not display blue color, even if the focus adjustmentis optimal. So readjust the focus with rotating the focus ring.5) Press the button on the remote control or the control panel.f The adjustment image of [SCREEN FIT] appears.Screen frame detectedIf it detects a screen frame, the projected image is corrected to fit the screen frame automatically.ENGLISH - 45Chapter 3 Basic Operations - Projecting