Panasonic PT-VW345NZ Operating Instructions Manual

Also see for PT-VW345NZ: Operating instructions (functional manual)Specifications

Contents

f The items will switch each time you press the button.[CC1] Displays CC1 data.[CC2] Displays CC2 data.[CC3] Displays CC3 data.[CC4] Displays CC4 data.Notef Closed caption is a function that displays text information of video signals mainly used in North America. Captions may notbe displayed depending on the connected devices or contents being played back.f [CLOSED CAPTION SETTING] can only be selected if an NTSC or 480i YCBCR signal is input.f If [CLOSED CAPTION SETTING] is set to [ON], the brightness of image may be changed according to the external devicesor the used content of the closed caption corresponding connection.f If a closed caption signal of the selected mode is input, the text is not displayed even when the [SECURITY] menu → [TEXTDISPLAY] (Æ page 83) is set to [ON].f Closed captions are not displayed when the menu screen is displayed.[SCREEN SETTING](Only for PT-VW345NZ)Set the screen size.When changing the aspect of a projected image, correct to the optimum image position for the set screen. Set as necessaryfor the screen in use.1) Press as to select [SCREEN SETTING].2) Press the button.f The [SCREEN SETTING] screen is displayed.3) Press qw to switch the [SCREEN FORMAT] item.f The items will switch each time you press the button.[SCREEN FORMAT] Description Range when [SCREEN POSITION] is selected[16:10] The projected aspect ratio is 16:10. Cannot be adjusted.[16:9] The projected aspect ratio is 16:9. Adjusts the vertical position.4) Press as to select [SCREEN POSITION].f If [SCREEN FORMAT] is set to [16:10], adjustment of [SCREEN POSITION] are not available.5) Press qw to adjust the [SCREEN POSITION].f The items will switch each time you press the button.[HIGH] The image which aspect ratio is 16:9 will displayed at the top.[CENTER] The image which aspect ratio is 16:9 will displayed in the center.[LOW] The image which aspect ratio is 16:9 will displayed at the bottom.[STARTUP LOGO]Set the logo display when the power is turned on.1) Press as to select [STARTUP LOGO].2) Press qw to switch the item.f The items will switch each time you press the button.[DEFAULT LOGO] Displays the Panasonic logo.[USER LOGO] Displays the image registered by the user.[OFF] Disables the startup logo display.Notef The startup logo will disappear in approximately 30 seconds.f To create/register the [USER LOGO] image, use “Logo Transfer Software” included in the supplied CD-ROM.f If you do not register the image of the [USER LOGO], the startup logo will not be displayed even if the [STARTUP LOGO] isset to [USER LOGO].70 - ENGLISHChapter 4 Settings - [DISPLAY OPTION] menu