[TV-SYSTEM](Only when the /The projector will automatically detect the input signal, but you can set the color system manually when an unstable signal isinput. Set the color system matching the input signal.1) Press as to select [TV-SYSTEM].2) Press qw or the button.f The [TV-SYSTEM] individual adjustment screen is displayed.3) Press qw to select the color system.f The items will switch each time you press the button.f Select among [AUTO], [NTSC], [NTSC4.43], [PAL], [PAL-M], [PAL-N], [PAL60] and [SECAM].f Set it to [AUTO] normally. (Setting [AUTO] will automatically select [NTSC], [NTSC4.43], [PAL], [PAL-M], [PAL-N],[SECAM], or [PAL60].)[RGB/YPBPR]/[RGB/YCBCR]Set it to [AUTO] normally. If images are not displayed correctly when this is set to [AUTO], set either [RGB], [YCBCR] or [YPBPR]in accordance with the input signal.1) Press as to select [RGB/YPBPR] or [RGB/YCBCR].2) Press qw or the button.f The [RGB/YPBPR] or [RGB/YCBCR] individual adjustment screen is displayed.3) Press qw to switch the item.f The items will switch each time you press the button.[AUTO] The sync signal automatically selects the signal [RGB]/ [YPBPR]/[YCBCR].[RGB] Select it for RGB signal input.[YPBPR] Select it for YPBPR signal input.[YCBCR] Select it for YCBCR signal input.When the terminal is selectedf For 525i (480i), 625i (576i), 525p (480p) and 625p (576p) inputSelect [AUTO], [RGB] or [YCBCR].f For other movie-based signal inputSelect [AUTO], [RGB] or [YPBPR].When the terminal is selectedf For 525p (480p) and 625p (576p) inputSelect [AUTO], [RGB] or [YCBCR].f For other movie-based signal inputSelect [AUTO], [RGB] or [YPBPR].Notef Refer to “List of compatible signals” (Æ pages 130 -131) for the signal details.f The signal selection may not function properly depending on connected devices.62 - ENGLISHChapter 4 Settings - [PICTURE] menu
