| 
Basic operations by using the remote controlUsing the AUTO SETUP functionThe automatic setup function can be used to automatically adjust the resolution, clock phase, and image position whenanalog RGB signals consisting of bitmap images such as computer signals are being input. Supplying images with brightwhite borders at the edges and high-contrast black and white characters is recommended when the system is in automaticadjustment mode.Avoid supplying images that include halftones or gradation, such as photographs and computer graphics.button1) Press the button on the remote control.Notef The [CLOCK PHASE] may shift even if it has completed without any incident. In such cases, adjust the [POSITION] menu →[CLOCK PHASE] (Æ page 65).f Automatic adjustment may not work depending on the model of the computer and the input signal.f Images may be disrupted for a few seconds during automatic adjustment, but it is not a malfunction.f If you press any button on the remote control during the automatic adjustment, the automatic adjustment will be canceled.f If the automatic setup function is used while moving images are being input, the adjustment may not be performed properlyeven for an RGB signal that can use automatic setup.Using the KEYSTONE buttonYou can correct the trapezoidal distortion that occurs when the projector is installed tilted or when the screen is tilted.button1) Press the button to select [KEYSTONE] or press the button again toselect [CORNER CORRECTION].f The [KEYSTONE] or [CORNER CORRECTION] individual adjustment screen is displayed.2) Press asqw to adjust the item.Notef For more details, refer to the [POSITION] menu → [KEYSTONE] (Æ page 63).ENGLISH - 47Chapter 3 Basic Operations - Basic operations by using the remote control |
