[EZ570 SERIES] EZ570 series, EW630 series, EW530 series, EX600 series, EX500 series[VW431D] VW431D series4) Press the button.[FUNCTION BUTTON]The function assigned to the button of the remote control is displayed. You can also release the assignedsetting.Releasing assigned function to the button1) Press as to select [FUNCTION BUTTON].2) Press the button.f The [FUNCTION BUTTON] screen is displayed.3) Select [DISABLE], then press the button.4) When the confirmation message is displayed, select [OK] and press the button.Notef You can also cancel the assigned settings by displaying the on-screen menu, selecting the menu item to be canceled (mainmenu, submenu, or details menu), and then pressing the button for at least 3 seconds.[AUDIO SETTING]You can perform more detailed setting for Audio.Adjusting the volume1) Press as to select [AUDIO SETTING].2) Press the button.f The [AUDIO SETTING] screen is displayed.3) Press as to select [VOLUME].4) Press qw to adjust the level.Operation Adjustment RangePress the w button. Turns up the volume. 0 ~ 63Press the q button. Turns down the volume.Setting the mute1) Press as to select [AUDIO SETTING].2) Press the button.f The [AUDIO SETTING] screen is displayed.3) Press as to select [MUTE].4) Press qw to switch the item.[ON] Turns off the volume temporarily.[OFF] Output the audio.Setting the audio output during standby1) Press as to select [AUDIO SETTING].2) Press the button.f The [AUDIO SETTING] screen is displayed.3) Press as to select [IN STANDBY MODE].4) Press qw to switch [IN STANDBY MODE].f The items will switch each time you press the button.78 - ENGLISHChapter 4 Settings - [PROJECTOR SETUP] menu
