| 
f The items will switch each time you press the button.[SXGA] Normal setting.[SXGA +] Set this when the edge of the image is cropped.[P-TIMER]Set and operate the presentation timer function.1) Press as to select [P-TIMER].2) Press the button.f The [P-TIMER] screen is displayed.[MODE] Switches the elapsed time between [COUNT UP] and [COUNT DOWN].[TIMER] Sets the finish time of timer when [COUNT DOWN] is selected.[START] / [STOP] /[RESTART] Operates the timer.[RESET] Resets the count.[EXIT] [P-TIMER] is finished.Setting [MODE]1) Press as to select [MODE].2) Press qw to switch the item.f The items will switch each time you press the button.[COUNT UP] Displays the elapsed time from count started.[COUNT DOWN] Displays the remaining time for the time set in [TIMER] menu.Setting the countdown timer1) Press as to select [TIMER].2) Press qw to set the timer.f The timer can be set from 1 to 180 minutes in 1 increment.f The factory default setting is 10 minutes.Notef [TIMER] is available only when [MODE] is set to [COUNT DOWN].The operation of [P-TIMER]1) Press as to select [START], [STOP] or [RESTART].[START] Starts counting.[STOP] Stops counting.[RESTART] Restarts counting.2) Press the button.f When you select [START] or [RESTART], the remaining time or the elapsed time will be displayed in the lower right ofthe projected image.f When you select [STOP], the remaining time or the elapsed time while stopping the counting will be displayed in thelower right of the projected image.f When [RESET] is selected, then go to step 3).3) Press the f The start time will be displayed in the lower right of the projected image.Notef You can also use the P-TIMER function by pressing the button on the remote control (Æpage 52).f If the elapsed time or remaining time is displaying, the text will not be displayed even when the [SECURITY] menu → [TEXTDISPLAY] (Æ page 83) is set to [ON].f The elapsed time or remaining time will not be display when the Menu screen is displaying.f The start time will be "000:00" when [MODE] is set to [COUNT UP].f The start time will change to the time which is set in [TIMER] when [MODE] is set to [COUNT DOWN].f The circle gauge for [COUNT UP] is rotated clockwise, the circle gauge for [COUNT DOWN] is rotated counter-clockwise.72 - ENGLISHChapter 4 Settings - [DISPLAY OPTION] menu |
