Panasonic PT-VW430U Operating Instructions Manual

Also see for PT-VW430E: Service manual

Contents

Panasonic PT-VW430U Operating Instructions Manual Manual pdf 24 page image

Setting up24 - ENGLISHGetting StartedAdjusting the position using the vertical lens shift functionIf the projector is not positioned right in front of the center of the screen, you can adjust the vertical position ofprojected image by moving the vertical lens ring within the shift range of the lens.Lens shift adjustment for PT-VX500U1 )and PT-VX501ULens shift adjustment for PT-VW430U2 )Adjusting front adjustable feetThe adjustable feet can be extended by turning it as shown in the figure. It is retracted by turning it in theopposite direction. (Projection angle can be adjusted vertically.)AttentionHeated air comes out of the air exhaust port while the lamp is lit. Do not touch the air exhaust port directly when you adjustzthe front adjustable feet.If keystone distortion occurs on the projected image, perform “KEYSTONE” from the “Screen” menu. (z Æpage 49)NoteScrew up the adjustable feet, and an audible click will be heard as the limit.zAdjustable rangeFront adjustable feet : 48.5 mm(1.909")Feet Lock LatchesThe display position can be shifted upward upto 40% elevation of the display. (When turnthe vertical lens shift ring to the right (left), thedisplay moves up (down)).The display position can be shifted upwardup to 48% elevation of the display. (Whenturn the vertical lens shift ring to the right(left), the display moves up (down)).40%Lens shift adjustable range48%Lens shift adjustable rangeShift rangeShift rangeLens shift centerpositionLens shift centerpositionAttentionPlease note the followings when using the projector.Do not touch the lens while it is moving as this could cause injury to the fingers.zNever allow children to touch the lens.z