44 - ENGLISHSettingsImage selectSelect [Image select] from the Main Menu (see“Navigating through the menu” on page 36),then select the item from the sub-menu.Remote Control Control PanelDynamicFor viewing pictures in a bright room.Press ▲▼ to select [Dynamic] and thenpress the button.StandardNormal picture mode preset on the projector.Press ▲▼ to select [Standard] and thenpress the button.RealPicture mode with improved halftone for graphics.Press ▲▼ to select [Real] and then pressthe button.CinemaPicture mode adjusted with fine tone.Press ▲▼ to select [Cinema] and thenpress the button.Blackboard(Green)For the image projected on a blackboard.Press ▲▼ to select [Blackboard(Green)]and then press the button.This mode helps enhance the image projectedzon a blackboard. This is mainly effective on agreen colored board, not truly effective on ablack colored board.ColorboardFor the image projected on a colorboard.Press ▲▼ to select [Colorboard].1 )Press ► or the button to2 )display the submenu.Press ▲▼ to select a color and3 )[Green], and press the button.At the time of simple projection on the coloredzwall, you can get the close color image to thecolor image projected on a white screen byselecting the similar color to the wall color fromthe preset four colors (Red, Blue, Yellow andGreen).Image 1-4For viewing with the user preset image mode in theImage adjust Menu. This Image memory is providedin each computer, component and video input source.Press ▲▼ to select [Image 1-4] and thenpress the button.