|
SettingENGLISH - 53 SettingsAuto keystoneJAuto Always works and corrects keystonedistortion according to the projector's tilt.Manual Works only when pressing the SETUP> button on the remote control orthe control panel.Off Disables Auto Keystone.Note[Input search], [Auto PC adj.] and [Auto Keystone] cannotzbe set [Off] at the same time.The [Auto Keystone] function cannot work when thez[Ceiling] feature is set [On] in the [Screen] menu.BackgroundSelect the background screen for when no input signalis detected.Press ▲▼ to select [Background].1 )Press the button.2 )Press ▲▼ to switch3 ) between eachoption as below.Blue Blue colored background.User The logo transferred by "LogoTransfer Software *1 " is projected.Black Black colored background." Logo Transfer Software" is included on the*1 :supplied CD-ROM.DisplayThis function decides whether to display On-ScreenDisplays.Press ▲▼ to select [Display].1 )Press the button.2 )Press ▲▼ to switch3 ) between eachoption as below.On Show all the On-Screendisplays *1CountdownoffShow the input image insteadof the countdown when turningon the projector *2Off Hide the On-Screen Displays *3Use this function when you want to project*1 :images after the lamp becomes bright enough.The factory default setting is in this option.Use this function when you want to project the*2 :image as early as possible even when the lampis not bright enough.Hide the On-Screen Displays except;*3 :● On-Screen Menu.● [Power off?]● [P-timer] display.● No signal for [Power management]● [Please wait ...]● Arrows for the True function in the [Screen]Menu.● [Service]LogoThis function allows you to customize the screen logowith [Logo select], [Logo PIN code lock] and [LogoPIN code change] functions.Press ▲▼ to select [Logo].1 )Press ► or the button.2 )Press ▲▼ to choose the desired item.3 )Logo selectJThis function decides on the starting-up display fromamong following options.Off Show the countdown display only.Default Show the factory-set logo.User The logo transferred by "LogoTransfer Software *1 " is projected." Logo Transfer Software" is included on the*1 :supplied CD-ROM.Logo PIN code lockJThis function prevents an unauthorized person fromchanging the screen logo.Off The screen logo can be changed freelyfrom the Logo Menu.On The screen logo cannot be changedwithout a Logo PIN code.NoteIf you want to change the Logo PIN code lock setting,zpress the button and the Logo PIN codedialog box appears. Enter a Logo PIN code by followingthe steps below. The initial Logo PIN code is set to “4321”at the factory.
|
