ENGLISH - 51 SettingsSoundSelect [Sound] from the Main Menu (see“Navigating through the menu” on page 36),then select the item from the sub-menu.Remote Control Control PanelVolumePress ▲▼ to select [Volume] and then1 )press the button.Press ◄► to adjust the volume.2 ) Press button to set the volume.zOperation Adjustment AdjustmentrangePress ►. turn up thevolumeMaximumvalue 63Press ◄. turn down thevolumeMinimumvalue 0You can also press buttons onzthe remote control or control panel to adjust thevolume.MutePress ▲▼ to select [Mute].1 )Press the button to switch2 )the mute function [On]/[Off].Press the button on the remotezcontrol to temporarily turn off the sound. To turnthe sound back on, press the buttonagain or press the buttons.MICPress ▲▼ to select [MIC] and then1 )press the button.Press ▲▼ to switch the MIC function2 )[On]/[Off].When [Off] is selected in [MIC] function, the [MICzgain] and [Standby MIC out] functions are notavailable.Connect the computer 2 audio input signals tozCOMPUTER AUDIO IN 1 terminal as the MICfunction is turned on.If the [MIC] function is turned on whenzconnecting PC audio to the AUDIO IN (a minijack), loud sound may be output suddenlydepending on the setting value of [MIC gain].MIC gainPress ▲▼ to select [MIC gain] and1 )then Press the button.Press ◄► to adjust the MIC mixing2 )gain.Press button to set the [MIC gain].zOperation Adjustment AdjustmentrangePress ►. turn up the MICmixing gainMaximumvalue 63Press ◄. turn down theMIC mixing gainMinimumvalue 0Standby MIC outPress ▲▼ to select [Standby MIC out]1 )and then press the button.Press ▲▼ to switch the [Standy MIC2 )out] function [On]/[Off].When setting the [Standby MIC out] functionzto [On] and in Standby mode status, only[MIC] input volume can be output. Press the buttons on the control panel oron the remote control to adjust the MIC inputvolume.Only the Standby mode is set to [Network],z[Standby MIC out] can be selected.
