Panasonic PT-VW430U Operating Instructions Manual

Also see for PT-VW430E: Service manual

Contents

Panasonic PT-VW430U Operating Instructions Manual Manual pdf 30 page image

Powering ON/OFF30 - ENGLISHBasic OperationPress the <1 ) > button on the control panel oron the remote control, and Power off? appearson the screen.Press the <2 ) > button again to turn off theprojector. The indicatorstarts to blink orange, and the cooling fans keeprunning. At this time, you can unplug the ACpower cord even if the fans are still running.When the projector has cooled down enough, the3 ) indicator stops blinkingand you can turn on the projector.NoteDo not put the projector in a case before the projector iszcooled enough.While the indicator is blinking,zthe lamp is being cooled down and the projector cannotbe turned on. Wait until the indicator stops blinking to turn on the projector again.The projector can be turned on after the zSTANDBY(R)> indicator turns red. The waiting timeto restart will be shortened when the normal power-offprocessing for fan cooling is completed, compared withthe time the AC power cord is immediately unpluggedafter the power off.J Direct Power Off functionYou can disconnect the power cord from the walloutlet or turn off the breaker even during projectionwithout pressing the < > button.NoteWhen using the Direct power Off function, you canznot restart the projector immediately after the power isdisconnected. The lamp remains high temperature andneeds to be cooled, so it sometimes takes longer timethan usual for the lamp to light up again.Turning Off the ProjectorPower off? disappears after 4 seconds.