ENGLISH - 61 SettingsNetworkSelect [Setting] from the Main Menu (see“Navigating through the menu” on page 36),then select the item from the sub-menu.Remote Control Control PanelProjector nameYou can change the projector name to be displayedon the network.Press ▲▼ to select [Projector name],1 )and press button.Select characters with the ▲▼◄►2 )buttons and press the button to enter the projector name.Select [Set] with the ▲▼◄► buttons3 )and press the button.Select [Cancel] to undo the changes and thenpress the button. Select [BS] to deleteone character selected with the cursor in the inputbox.Select [YES] or [No] with the ▲▼4 )buttons and press the button.Network setupYou can make detailed wired LAN settings.Press ▲▼ to select [Network setup],1 )and press button.Press ▲▼ to select an item, and2 )change the setting according to theinstructions.DHCP(DHCP clientfunction)On: If a DHCP serverexists in thenetwork to whichthe projector isconnected, theIP address willautomatically beacquired.Off: If a DHCPserver doesnot exist in thenetwork to whichthe projectoris connected,additionally set[IP address],[Subnet mask] and [ Defaultgateway ].IP address(Display of IPaddress and setting)Enter the IP addressif DHCP server is notused.Subnet mask(Displaying andsetting the subnetmask)If not using a DHCPserver, enter the subnetmask.Default gateway(Display of gatewayaddress and setting)Enter the gatewayaddress if DHCP serveris not used.DNS1(Display ofPreferred DNSserver addressand setting)Enter the DNS serveraddress if DHCP serveris not used.DNS2(Display ofAlternate DNSserver addressand setting)Enter the alternate DNSserver address if DHCPserver is not used.Press ▲▼◄► to select [Set], and press3 ) button.Default wired LAN settingszThe following settings are set before theprojector leaves the factory.DHCP OffIP address 192.168.10.100Subnet mask 255.255.255.0Default gateway 192.168.10.1DNS1/DNS2 NONENoteBefore using the DHCP server, make sure the DHCPzserver is already functioning.For details of IP address, subnet mask, gateway andzDNS, ask the network administrator.
