Panasonic Palmcorder MultiCam PV-VM202 Operating Instructions Manual

Contents

Panasonic Palmcorder MultiCam PV-VM202 Operating Instructions Manual Manual pdf 13 page image

13R E CSAVE2342OPEN/EJECT1 114321Attaching the Lens CapTo protect the Lens surface, attach the Lens Cap.1 Pass the loop of the Lens Cap Cord through the Lens CapInstallation Hole on the Palmcorder.2 Pass the opposite side of the Lens Cap Cord through thecord’s hoop.3 Pull the Lens Cap to the direction of the arrow.4 Attach the Lens Cap.≥The removed Lens Cap can be hooked onto the Grip Belt 1. (When youare not recording, be sure to keep the Lens Cap attached to the Lens forprotection.)≥If the supplied Lens Hood for MEGA STILL TM Pictures Recording isattached, the Lens Cap cannot be attached.~~~~~~~~~~~~~~~~~~~~~~~~~Adjusting the Grip BeltAdjust the length of the Grip Belt to the size of your hand.1 Pass your hand through the Grip Belt and adjust its length.2 Fold back the end of the Grip Belt to securely fasten thevelcro tape closure.≥The Grip Belt can also be adjusted in SD Camera Style.~~~~~~~~~~~~~~~~~~~~~~~~~Inserting a CassetteWhen power is supplied to the Palmcorder, the cassette can be taken outwithout turning the Palmcorder on.1 Slide the [OPEN/EJECT] Lever 1 to the right and pull downto open the Cassette Compartment.2 Insert a Cassette.3 Close the Cassette Compartment and lock the CassetteCompartment by pressing the [PUSH TO CLOSE] mark.4 Close the Lower Cassette Compartment Cover.≥For other notes, see page 60.ª Accidental Erasure PreventionOpening the accidental erasure prevention slider 2 on the cassette (bysliding it in the [SAVE] arrow direction) prevents recording. To enablerecording, close the accidental erasure protection slider (by sliding it in the[REC] arrow direction.)12