Panasonic Palmcorder MultiCam PV-VM202 Operating Instructions Manual

Contents

Panasonic Palmcorder MultiCam PV-VM202 Operating Instructions Manual Manual pdf 59 page image

59ª Changing the Counter Display ModeBy changing [C.DISPLAY] on the [DISPLAY SETUP]Sub-Menu, you can change the Counter Display Mode toTape Counter Indication (0:00.00), Memory CounterIndication (M0:00.00), and Time Code Indication(0h00m00s00f).≥You can also press the [COUNTER] Button of the RemoteController repeatedly to change the Counter Indication.ª Displaying Date/Time IndicationTo display Date/Time Indication, set the appropriatedate/time in [DATE/TIME] on the [DISPLAY SETUP]Sub-Menu.≥You can also press the [DATE/TIME] Button of the RemoteController repeatedly to display or change the Date/TimeIndication.ª Changing the Display ModeBy changing [DISPLAY] on the [DISPLAY SETUP]Sub-Menu, Counter Display Mode changes to All FunctionDisplay, Partial Display, and Minimum Display.~~~~~~~~~~~~~~~~~~~Warning/Alarm IndicationsIf any one of the following indications lights up or flashes,please check the condition of the Palmcorder.EJECT TAPE: After the [DEW DETECTED]Indication appears, eject theCassette.Y CHECK REC TAB : The erasure prevention tab on theinserted Cassette is open (that is,set to [SAVE]).When you are attempting to doaudio dubbing on the unrecorded(blank) portion of the tape, or youare attempting to do dubbing on theCassette whose tab is set at [SAVE].(l 33, 45, 46)Y TAPE NOT INSERTED:No Cassette is inserted. (l 13)X LOW BATTERY: The Battery is low. Recharge it.(l 12)0: The internal lithium battery is low.(l 19)2 END/TAPE END: The tape ended during recording.REMOTE/CHECK REMOTE MODE:Wrong Remote Controller Mode hasbeen selected. (l 11)CANNOT REC LP-MODE:Because the original recording wasdone in LP Mode, audio dubbingcannot be performed. (l 33)INCOMPATIBLE DATA:This Cassette is incompatible orcontains copy-guard.Because the medium is protected bya copy guard, images cannot berecorded correctly.°: If this Indication appears, return theLCD Monitor to the original positionin order to check the specific contentof the Warning/Alarm Indication.AV INPUT RECORDING:When you are attempting to recordon the Memory Card during dubbing(l 45, 46) on the Cassette.NO CARD: There is no Memory Card inserted.PLEASE WAIT: When reading of the Memory Card(playback, format, when using theMulti-Picture Function). (llll 39, 44)CARD ERROR: The Memory Card is not compatiblewith the Palmcorder.CHECK SELECT SWITCH:With the combination of modes setwith the [TAPE/CARD] Selector andthe [STILL/MPEG4/VOICE]Selector, this Indication appears:Pressing the Recording Start/StopButton with [CARD] and [STILL] inCamera Mode.Pressing the PhotoShot Button with[CARD] and [MPEG4] or [VOICE] inCamera Mode.Pressing the PhotoShot Button with[TAPE] and [STILL] in VCR Mode.Pressing the Recording Start/StopButton with [TAPE] and [MPEG4] inVCR Mode.Pressing the PhotoShot Button with[CARD] and [STILL] in CardPlayback Mode.FILE LOCKED: When you are attempting to delete alocked picture. The locked picturecannot be deleted.WRITE PROTECTED: When you are attempting to writethe data on an SD Memory Cardwhose write protection switch is setat [LOCK].NO PICTURE: There are no pictures in the MemoryCard.NO MPEG4 DATA : There are no MPEG4 data on theMemory Card in the Card PlaybackMode.NO VOICE DATA : There are no Voice data on theMemory Card in the Card PlaybackMode.NO TITLE: There are no titles in the MemoryCard.NO SPACE LEFT: Card does not have sufficientmemory remaining.Select Card Mode and deleteunnecessary files.CHANGE TO 640a480:Titles cannot be displayed. (llll 42)Set to the [640a480] resolutionsetting.k: You are attempting to play back adata which is not compatible withthis Palmcorder. (llll 39)DEW DETECTED: Condensation has occurred. (l 66): NEED HEAD CLEANING:The video heads are dirty. (llll 66)PUSH THE RESET SWITCH:Irregular mechanism is detected.Press the [RESET] Button.This may solve the problem.You are attempting to record to aMemory Card formatted with otherequipment (like a PersonalComputer). Format the MemoryCard with this equipment.NEEDS TO BE SERVICED:First disconnect the power supplyand request service.