Panasonic Palmcorder MultiCam PV-VM202 Operating Instructions Manual

Contents

Panasonic Palmcorder MultiCam PV-VM202 Operating Instructions Manual Manual pdf 25 page image

2511AWB14131252, 31AUTO MANUALFOCUSW.B./SHUTTER/IRIS/MF/VOL/JOGPUSH121MNL12, 3 41W.B./SHUTTER/IRIS/MF/VOL/JOGPUSH1212AUTO MANUALFOCUSRecording in Natural Colors(White Balance)Depending on the scene or light conditions, the Automatic White BalanceAdjustment Mode may not be able to bring out natural colors. In such a case,the white balance can be adjusted manually.1 Set the Mode Selector Switch to [MANUAL].≥The [MNL] Indication appears.2 Press the [PUSH] Dial.≥The [AWB] Indication appears.3 Rotate the [PUSH] Dial to set a desired White Balance Mode.1 Automatic White Balance Adjustment [AWB]2 Indoor Mode (shooting under incandescent lamp)3 Outdoor Mode4 Fluorescent light Mode5 The White Balance setting that was previously set manuallyTo Resume Automatic AdjustmentRotate the [PUSH] Dial until the [AWB] Indication appears. Or, set the ModeSelector Switch to [AUTO].≥For other notes, see page 61.~~~~~~~~~~~~~~~~~~~~~~~~~Adjusting White Balance ManuallyWhen the Auto White Balance Adjustment function does not operate underthe existing light conditions, use the Manual White Balance Adjustmentmode.1 Set the Mode Selector Switch to [MANUAL].≥The [MNL] Indication 1 appears.2 Press the [PUSH] Dial.≥The [AWB] Indication appears.3 Rotate the [PUSH] Dial until the [1] Indication 2 isdisplayed.4 Point the Palmcorder at a full-screen white subject, and thenkeep the [PUSH] Dial pressed until Indication [1] stopsflashing.≥When the [1] Indication flashes after turning the Palmcorder on, thepreviously adjusted white balance setting is still kept.To Resume Automatic AdjustmentRotate [PUSH] Dial until the [AWB] Indication is displayed. Or, set the ModeSelector Switch to [AUTO].ª About White Balance SensorThe White Balance Sensor determines the nature of the light source duringrecording.≥Do not cover the White Balance Sensor with your hand during recording.Otherwise, White Balance will not work normally.Use of Auto White Balance Adjustment in inappropriate lighting conditionsmay result in reddish or bluish images. Where the subject is found on the leftbut surrounded by many light-sources, Auto White Balance Adjustment maynot operate properly. In such a case, we suggest that you adjust the WhiteBalance.1) The range that is controlled by the Auto White Balance Adjustment Modeof this Palmcorder2) Blue sky3) Cloudy sky (Rain)4) TV screen5) Sunlight6) White fluorescent light7) Halogen light bulb8) Incandescent light bulb9) Sunrise and sunset10) Candlelight≥For other notes, see page 61.10 000K9 000K8 000K7 000K6 000K5 000K4 000K3 000K2 000K1 000K2)1)3)4)5)6)7)8)9)10)