Panasonic Palmcorder MultiCam PV-VM202 Operating Instructions Manual

Contents

Panasonic Palmcorder MultiCam PV-VM202 Operating Instructions Manual Manual pdf 14 page image

1412:30:45PMOCT 10 200212:30:45PMOCT 10 200212:30:45PMOCT 10 200212:30:45PMOCT 10 20022 33LCD/EVF SETPUSH MENU TO RETURNLCD BRIGHTNESSLOW||||----HIGHLCD COLOR LEVELLOW||||----HIGHEVF BRIGHTNESSLOW||||----HIGH180x 90x22 11OFF ON MODE1Turning on/off the Palmcorder and SelectingModesTurn on the power first and then select Modes.ª How to Turn on the Power1 Set the [OFF/ON/MODE] Switch to [ON] while pressing thecenter Button 1.≥The [CAMERA] Lamp lights up.ª How to Switch Modes2 Slide the [OFF/ON/MODE] Switch.≥With each slide of the Switch, the Mode switches in the order of CameraMode, VCR Mode, and Card Playback Mode.≥The appropriate Mode Lamp lights up.ª How to Turn off the Power3 Set the [OFF/ON/MODE] Switch to [OFF] while pressing thecenter Button 1.~~~~~~~~~~~~~~~~~~~~~~~~Using the ViewfinderBefore using the Viewfinder, adjust the field of view so that the displays insidethe viewfinder become clear and easy to read.1 Slide the Viewfinder backward to access the EyepieceCorrector Knob.2 Adjust by sliding the Eyepiece Corrector Knob 1.Using the LCD MonitorWith the LCD Monitor open, you can also record the picture while watching it.1111 Set the [OFF/ON/MODE] Switch to [ON].2222 Press the [PUSH OPEN] Button and, at the same time, bringout the LCD Monitor about 90x in the direction of the arrow.≥The Viewfinder goes off.3333 Adjust the LCD Monitor angle according to the desiredrecording angle.≥The LCD Monitor can rotate a maximum of 180x 2 from the verticalposition to the upward direction and a maximum of 90x 3 to thedownward direction. Forcefully rotating the LCD monitor beyond theseranges will damage the Palmcorder.Closing the LCD monitorPush the LCD Monitor until the [PUSH OPEN] Button is securely locked.ª Adjusting Brightness and Color LevelWhen [LCD/EVF SET] on the [DISPLAY SETUP] Sub-menu is set to [YES],the following items are displayed:LCD Brightness [LCD BRIGHTNESS]Adjusts the brightness of the image on the LCD screen.LCD Color Level [LCD COLOR LEVEL]Adjusts the color saturation of the image on the LCD screen.Brightness of the Viewfinder [EVF BRIGHTNESS]Adjust the brightness of the image in the Viewfinder.1 Press the [PUSH] Dial and select the item you want to adjust.2 Rotate the [PUSH] Dial and increase or decrease the numberof the vertical bars on the Bar Indication.≥The Bar Indication has 8 steps. A larger number of vertical barsindicates stronger brightness or color saturation.Increasing the Brightness of the Entire LCD MonitorSet the [LCD MODE] on the [DISPLAY SETUP] Sub-Menu to [BRIGHT].≥These adjustments do not affect the recorded images.≥For other notes, see page 67.1CAMERACARD P. B.VCROFF ON MODE1, 2, 3