Panasonic Palmcorder MultiCam PV-VM202 Operating Instructions Manual

Contents

Panasonic Palmcorder MultiCam PV-VM202 Operating Instructions Manual Manual pdf 49 page image

49TO PC4)3)2)1)Using the Supplied USB Connection Kitª Operating environmentUSB Driver can be installed in a PC/AT compatible personal computerwhich can run Microsoft Windows® XP, Windows® Me, Windows® 98SE,Windows®2000 Professional.≥USB DriverFor Windows®≥IBM PC/AT or compatible≥Intel Pentium ll Processor: 300 MHz or higher CPU recommended≥Microsoft Windows® XP, Windows® Me, Windows® 98SE, Windows®2000Professional pre-installed PC with USB port≥Video card that supports16 bit color at 800k600 monitor resolution≥RAM: 64 MB or more≥2 MB minimum available hard disk space≥Disk drive: CD-ROM drive≥Ports: USB Terminal≥Other requirements: Mouse or other pointing device~~~~~~~~~~~~~~~~~~~~~~~~~Installing USB DriverIn order for USB Driver to be installed, the hard disk must have at least 2 MBof free space. Before proceeding with installation, check out the amount offree space on the hard disk.1 Insert supplied CD-ROM into the CD-ROM drive.≥[Setup Menu] 1 appears.2 Select the software to be installed from [Setup Menu].≥The set up program starts running.3 Finish installation by following the on-screen instructions.≥Carefully read the license agreement on the window, and if you agreeclick [Yes]. Software is not installed if [No] is clicked.4 Click [OK] when the [Restarting Windows] Dialog appears.≥Reboot the computer to finish installing USB driver.≥Installation continues after the computer reboots if you selectedadditional software.≥If you no longer need the driver, see page 55.≥Update the driver after upgrading the OS.~~~~~~~~~~~~~~~~~~~~~~~~~Connecting Computer and PalmcorderInstall USB Driver (above) before connecting.Before making these connections, turn off all devices which are to beconnected.1 Install the supplied USB Driver. (above)2 Insert memory card into Palmcorder, then set card playbackmode.3 Use auxiliary USB Connection Cable to connect.≥PC connecting mode.1) Palmcorder2) USB Connection Cable3) USB terminal4) Personal computer (not supplied)≥After making the connections, turn the connected equipment on.≥Appropriate driver to recognize Palmcorder is automatically installed byWindows Plug’n Play when connected first time.≥When using the USB Connection Kit, use of the AC Adaptor isrecommended to use as the power supply of the Palmcorder.≥After the USB Driver is installed and USB Connection Cable is connected tothe Palmcorder, open [My computer] or [Windows Explorer] to check thedrive is displayed as a removable disk drive (only when card is inserted intothe Palmcorder). It enables you to operate like a floppy disk drive, and youcan use the same drag and drop or copy methods.4VFA0366LSFT04891 1