Panasonic SDR-S100 Operating Instructions Manual

Also see for SDR S10 - Camcorder - 800 KP: Operating instructions

Contents

101VQT0T50Problem Check pointsThe scenes are notcorrectly displayed inthumbnails.≥ Scenes displayed asthumbnails in shades of blueand white cannot be playedback or deleted. If the scenesare unnecessary, format theSD card to erase the data.≥ Please be aware that if an SDcard is formatted, then all the data recorded on the cardwill be erased. Store important data on a PC, etc. Whensaving scenes recorded using this unit to a PC, youmust use MotionSD STUDIO. (P73)“PUSH THE RESETSWITCH.” is displayed.≥ The unit has automaticallydetected an error. To protect thedata, remove the SD card and thenpress the [RESET] button with theprojecting part 1 of the handstrap. This will restart the unit.When you press the [RESET]button, the date and time settingwill also be reset. Set the date andtime again.≥ Even after you press the [RESET] button, the indicationmay still appear repeatedly. If so, this unit needs repair.Detach the power connected, and consult the dealerwho you purchased this unit from. Do not attempt torepair the appliance by yourself.Even if connected by theUSB cable, this unit isnot recognized by thePC.≥ Have you installed the Web camera driver?> Install the driver, then check the connections.≥ Have you set this unit to the correct mode?> The unit is not recognized if it is set to motion pictureplayback mode. (P80)≥ Select another USB terminal on the PC.≥ Check the operating environment. (P75, 76)≥ Turn on the power to this unit.When the USB cable isdisconnected, an errormessage will appear on PC.≥ To disconnect the USB cable safely, double-click theicon in the task tray and follow the instructionson the screen.The warning/alarmindication [°] appearswhen this unit isoperated in the WEBcamera mode.≥ Did you press the record button or any other button?> You cannot record onto the card in the WEB camera mode.≥ Have you installed the Web camera driver?> Install the driver, then check the connections.The [ ] indicationflashes when this unit isconnected to a PC.≥ The unit is connected to a Windows XP PC in stillpicture playback mode.> Connect with a printer supporting PictBridge.The [ ] indicationappears when the unit isconnected to the printer.≥ The unit is connected to the printer in motion picturerecording mode or still picture recording mode.> Change the mode to still picture playback mode.SETUP PLAY1PictBridgeWEB