47VQT0T50To set the white balance manuallySelect [ ] mode, fill the screen with awhite subject and then press the cursorbutton up to select the [ ] indication.≥ When the [ ] display changes from flashing toon, setting is complete.About flashing of the [ ] indicationWhen the manual adjustment mode is selected≥ Flashing indicates that the white balance previously adjusted is stored. This setting isstored until the white balance is adjusted again.When white balance cannot be set in the manual adjustment mode≥ White balance may not be adjusted properly in the manual adjustment mode in darkplaces. If so, use the auto white balance mode.During setting in the manual adjustment mode≥ The [ ] indication flashes while settings are being performed in set mode. Uponcompletion of the settings, it stops flashing and lights instead.∫ About the white balance sensorDo not cover the white balance sensor 1 during recording, or itmay not function properly.∫ About the black balance adjustmentThis is one of the 3CCD system functions thatautomatically adjusts the black when the whitebalance is set in the manual adjustment mode.When the black balance is adjusted, the screenwill temporarily be black. (The black balancecannot be adjusted manually.)1 Black balance adjustment in progress (flashes)2 White balance adjustment in progress (flashes)3 Adjustment completed (lights)MNL≥ When setting both the white balance andthe iris/gain, set the white balance first.≥ Whenever recording conditions change,re-set the white balance for correctadjustment.1 2 3
