18VQT0T50How to turn on the powerSet the power switch to [ON].The status indicator 1 lights red and, in motionpicture recording mode or still picture recordingmode (P20), the lens cover opens.How to turn off the powerSet the power switch to [OFF].The status indicator goes out and the lens covercloses.≥ If the LCD monitor is closed in motion picturerecording mode or still picture recording mode(P20), the power turns off.Quick startIf quick start is set and then the LCD monitor is closed while the unit’s power is still on,the unit will be ready for recording about 1.5 seconds after the LCD monitor is nextopened.Use the quick start function when stopping recording for a few moments.≥ The quick start function can be set in the following cases.– In motion picture recording mode, when the SD card is inside this unit– In still picture recording mode, when the SD card is inside this unitTo set quick start functionPress the menu button B, use thecursor button A to select[ SETUP]#[ QUICK START], andthen set the function to [ON]. (P26)When the LCD monitor is closed, the quick startstandby mode is established.1 The status indicator lights green.≥ If quick start is set, the lens cover does notclose.If the quick start function is setWhen the LCD monitor is opened, the unitgoes into recording standby.2 When the LCD monitor is opened, the statusindicator lights red.Turning the unit on/offOFFON1OFFONMENUSETUP ENTER EXITDISPLAYFORMAT CARDDATE/TIMEQUICK STARTSETUPOFFON1/3DATE FORMAT1 2AB
