Panasonic Varicam 35 Operating Manual

Contents

– 103 –Chapter 10 Menu Operations — Menu listMenu list[SYSTEM SETTINGS]Sets the system in general.f is the extended menu. Set [MENU] → [CAMERA SETTINGS] → [Enhanced] → [Enhanced SW] to [ON] to display the extended menu.Item Description of settings[SYSTEM MODE] [FREQUENCY] Sets the system frequency.If the setting of this item is changed, the device must be restarted. If a restart is required, a confirmationdialog will be shown.The camera’s system operation are determined by four settings: [FREQUENCY], [PIXEL], [MAIN CODEC],and [HIGH SPEED]. Check the four settings.[23.98p], [24.00p], [25.00p], [29.97p], [50.00p], [50.00i], [59.94p], [59.94i]f Factory setting: [23.98p][V-RAW] Sets the V-RAW format.Displayed only when the V-RAW recorder is connected.[4K/12bit], [4K/10bit], [UHD/12bit], [UHD/10bit]f Factory setting: [4K/12bit][MAIN PIXEL] Sets the main recorder’s number of recording pixels.[4096×2160], [3840×2160], [2048×1080], [1920×1080]f Factory setting: [4096×2160][MAIN CODEC] Sets the main recorder’s recording codec. Selectable items vary depending on the [FREQUENCY]/[PIXEL]setting.[AVC-Intra4K 444], [AVC-Intra4K 422], [AVC-Intra4K-LT], [AVC-Intra2K 444], [AVC-Intra2K 422],[AVC-Intra444], [AVC-Intra200], [AVC-Intra422], [AVC-Intra100], [ProRes 422 HQ], [ProRes 4444],[OFF][OFF] is displayed only when the V-RAW recorder is connected.f Factory setting: [AVC-Intra4K 422][SUB CODEC] Sets the sub recorder’s recording codec. Selectable items vary depending on the [FREQUENCY]/[PIXEL]setting.At the same time, this enables/disables proxy data recording.[AVC-Intra2K 422], [AVC-Intra422], [AVC-Intra100], [AVC-LongG50], [AVC-LongG25], [AVC-Intra2K422 & Pxy], [AVC-Intra100 & Pxy], [AVC-LongG50 & Pxy], [AVC-LongG25 & Pxy], [OFF]f Factory setting: [AVC-Intra2K 422][VFR SUB REC] Sets the operation of the sub recorder during the variable frame rate operation.[VFR up to 60p (50p)], [NORMAL+Audio]f Factory setting: [VFR up to 60p][HIGH SPEED] Sets the high speed mode.[ON (**-**fps)], [OFF (1-**fps)]The variable frame rate recording is not possible when the variable range of the variable frame rate isexceeding 60 fps, and it is displayed with [(NO SUB VFR)].** represents the variable range of VFR. This will change depending on the [MAIN CODEC] setting.Depending on the [MAIN CODEC] setting, when [HIGH SPEED] is set to [ON (**-**fps)], [CAMERASETTINGS] → [FPS] → [VFR SW] is fixed to [ON].f Factory setting: [OFF (1-60fps)][COLOR SETTING] [MAIN] Sets the colors of videos (entire camera system) recorded in the main recorder.[V-Log]/[V-709]/[3D LUT]It is fixed to [V-Log] when connected to the V-RAW recorder.f Factory setting: [V-Log][GRADING] Sets whether to apply the grading process.This only enabled when [V-Log] is set in [MAIN].[Internal]: Sets grading with the control panel.[OFF]: Disables the grading process.[External App]: Sets the grading using an external application.f Factory setting: [OFF][SUB] Sets the colors of videos (entire camera system) recorded in the sub recorder.Selectable items vary depending on the [MAIN] setting.When [MAIN] is set to [V-Log] and [GRADING] is set to [Internal] or [External App][V-Log]/[GRADING]When [MAIN] is set to [V-Log] and [GRADING] is set to [OFF][V-Log]/[V-709]When [MAIN] is set to [V-709][V-709]When [MAIN] is set to [3D LUT][3D LUT]f Factory setting: [V-Log][3D LUT] Sets the grading process method when [GRADING] is set to [Internal] or [External App].When [GRADING] is set to [Internal] or [External App][OFF]/[V-709]/[LOADED FILE]/[FILE SEL]/[SAVE AS(SD CARD)]When [GRADING] is set to [OFF][OFF]f Factory setting: [OFF]