– 14 –Chapter 2 Description of Parts — Recording module22 SD memory card slotSlot for SD memory cards (optional). SD memory cards are used for opening the camera setting menu, recording/opening lens files, or uploadingmetadata.Right side123456 8791 /// terminalOutput terminal for 3G/HD SDI. This terminal outputs videos in SINGLE, DUAL, or QUAD mode.For the cable to connect to this terminal, prepare a double-shielded cable equivalent to 5C-FB.2 Light output terminalPower supply terminal when light is connected.3 terminal (inside the cover, 5.0 V 0.5 A max)For mounting the wireless module AJ-WM30/AJ-WM50 (optional).For the cable to connect to this terminal, prepare a double-shielded cable.4 terminalConnects to the time code input terminal of the external device when locking the time code of the external device to the time code on the camera.For the cable to connect to this terminal, prepare a double-shielded cable equivalent to 5C-FB.5 terminalInputs reference signals when setting the genlock on the camera unit or when externally locking the time code. The input signal is 3G/HD-SDI.For the cable to connect to this terminal, prepare a double-shielded cable equivalent to 5C-FB.6 / terminal3G/HD-SDI output terminal of videos for the monitor.For the cable to connect to this terminal, prepare a double-shielded cable equivalent to 5C-FB.7 Fan outletFan outlet for dissipating heat. Do not block this when the camera is in use.8 terminalUSB device terminal for connecting a USB 2.0 cable.For the cable to connect to this terminal, prepare a double-shielded cable.9 terminalFor connecting a LAN (100BASE-TX) cable.For the cable to connect to this terminal, prepare a shielded cable.Front121 Lock angleFitting which secures the camera unit (optional) in place when connected.2 Camera unit connection terminalTerminal for connecting the camera unit (optional).
