– 118 –Chapter 10 Menu Operations — Menu listItem Description of settings[MON OUT] [MON OUT FORMAT] Select the signal output from the terminal and terminal.4096×2160, 2048×1080:[2048 over **p], [1920 (SQUEEZE) over **i], [1920 (SIDE CROP) over **i], [2048/**PsF], [1920(SQUEEZE)/**PsF], [1920 (SIDE CROP)/**PsF]3840×2160, 1920×1080:[1920 over **p], [1920 over **i], [1920/**PsF]** represents the frequency of the output signal. The signal that can be selected is limited dependingon the [SYSTEM MODE] setting. The setting value will automatically change when the [SYSTEM MODE]setting is changed.f Factory setting: [2048/24PsF][3G-SDI OUT] Sets the 3G SDI signal format to be output from the terminal and terminal.[LEVEL-A]: Selects the LEVEL-A method.[LEVEL-B]: Selects the LEVEL-B DL method.f Factory setting: [LEVEL-B][MON OUT2 SIGNALSEL]Sets the output from the terminal.[VF (1080p)]: Selects the same output as the terminal. The signal format will always be1920×1080p.[VF (1080i)]: Selects the same output as the terminal. The signal format will always be1920×1080i.[MON OUT1]: Selects the same output as the terminal.f Factory setting: [VF (1080p)][MON OUT1 STATUS] Sets whether to show the status display on the output from the terminal.[ON], [OFF]f Factory setting: [OFF][MON OUT2 STATUS] Sets whether to show the status display on the output from the terminal.[ON], [OFF]f Factory setting: [OFF][MENU DISP] Sets whether to display [MENU] in the output from the terminal and terminal.[ON], [OFF]f Factory setting: [ON][PLAY DISP & CTRL] Sets whether to display the PLAY screen in the output from the terminal and the OUT2> terminal.[ON], [OFF]f Factory setting: [OFF][VF OUT] [VF SDI OUT FORMAT] Selects the signal to output from the terminal.[1080P], [1080i]f Factory setting: [1080P][SURROUND VIEW SW] Enables/disables the surround view function (the function to display the image outside the effective rangeon the viewfinder).[ON], [OFF]f Factory setting: [OFF][SURROUND VIEWAREA]Selects the range of the surround view.[UPPER (NORMAL)], [LOWER]The image to be recorded will shift approximately 396 μm upwards from the center of the lens when[LOWER] is selected. Take care when the zoom lens is used.f Factory setting: [UPPER (NORMAL)][SURROUND VIEWLINE SW]Enables/disables the effective area line mark display function.[ON], [OFF]f Factory setting: [ON][SURROUND VIEWCOLOR]Sets the effective area line mark color.[WHITE], [BLACK], [RED], [GREEN], [BLUE], [YELLOW]f Factory setting: [WHITE][SURROUND VIEWLEVEL]Sets the microphone level for the surround signal.[OFF], [75%], [50%], [25%]f Factory setting: [OFF][SMOOTH MODE] Enables/disables the smooth mode (function which smoothens the viewfinder image when 24P and halfshutter function is running).[ON], [OFF]f Factory setting: [OFF][MON OUT INDICATOR] [SYSTEM PIXEL] Displays/hides system pixels.[ON], [OFF]f Factory setting: [ON][SYSTEM FREQ] Displays/hides system frequency.[ON], [OFF]f Factory setting: [ON][REC FORMAT] Displays/hides recording format display.[ON], [OFF]f Factory setting: [ON][REC MODE] Displays/hides the status for the interval recording or the pre-recording.[ON], [OFF]f Factory setting: [ON][VFR] Displays/hides the variable frame rate status.[ON], [OFF]f Factory setting: [ON]
