– 26 –Chapter 3 Preparation — Power supplyPower supplyA battery or an external DC power supply can be used as the power supply.Using batteriesConnection of the following batteries to the camera has been verified.r Anton/Bauer batteriesHYTRON140DIONIC HC/DIONIC HCX/DIONIC HDr IDX batteriesENDURA HL9@@ NOTEt Other batteries can be supported by changing [BATTERY SELECT] in [MENU] → [SYSTEM SETTINGS] → [BATTERY]. Use of batteries that arealready verified as connectable to the camera is recommended.t Before you use a battery, charge it with a battery charger. (For details on charging, refer to each operating instructions.)Mounting and setting batteryUsing Anton/Bauer batteriesAnton/Bauer batteriesRelease lever1 Mount the Anton/Bauer battery.2 Insert the battery terminal and slide in the direction of the arrow.3 Set the battery type.From [MENU] → [SYSTEM SETTINGS] → [BATTERY] → [BATTERY SELECT], select the battery type.For details, refer to “Setting menu basic operations” (page 102).@@ NOTEt To remove the battery, keep the release lever of the battery holder completely down, slide the battery in the opposite direction when you mounted it.Using V-mount type batteriesMount the V-mount type battery plate. As shown in the illustration, insert and slide in the direction of the arrow.Release lever1 Mount the V-mount type battery plate.2 Slide in the direction of the arrow.3 Set the battery type.f From [MENU] → [SYSTEM SETTINGS] → [BATTERY] → [BATTERY SELECT], select the battery type.
