Panasonic Varicam 35 Operating Manual

Contents

– 54 –Chapter 5 Control Panel — HOME screenHOME screenThe Home screen displays the basic camera settings and is used to change those settings.[FPS] Sets the frame rate.[VFR] Toggles the variable frame rate.When this is [OFF], the frame rate become 1x the rate set in [MENU] →[SYSTEM SETTING] → [FREQUENCY].f When this is [ON], audio cannot be recorded. Audio is recorded at the subrecorder.[PRESET] Mode for selecting preset frame rates.Up to 12 presets can be stored in memory.Presets can be added/deleted using [ADD]/[DEL].[VARIABLE] Mode for selecting from the overall variable range.The variable step changes through [FINE]/[NORMAL]/[COARSE].[SHUTTER] Sets the shutter speed.[ON]/[OFF] [OFF] means shutter off (open angle 360 deg).[PRESET] Mode for selecting preset shutter speeds.Up to 12 can be registered.Presets can be added/deleted using [ADD]/[DEL].[SYNCHRO] Mode for selecting from the overall variable range.The variable step changes through [FINE]/[COARSE].[deg/sec] Determines the shutter setting unit.[deg]: Open angle[sec]: Second[EI] Sets the EXPOSURE INDEX (gain).[ISO/dB] Selects the setting method.[NATIVE ONLY] Only the native ISO can be selected. (when [ISO] is set)[800BASE] The ISO800 standard value can be selected. (when [ISO] is set)[5000BASE] The ISO5000 standard value can be selected. (when [ISO] is set)[WB] Sets the color temperature (white balance).[AWB] Executes automatic white balancing.[PRESET] Mode for selecting preset white balance values.Up to 12 can be registered.Presets can be added/deleted using [ADD]/[DEL].If [AWB] is performed, the results are automatically added to the choices.[TEMP SHIFT] Mode for making adjustments from the overall variable range.[GMg] Shifts to the Green-Magenta axis.[COLOR] Sets the video colors (gamma and gamut).[MAIN COLOR] Sets the output colors of videos from terminals to aswell as videos recorded in the main recorder.[SUB COLOR] Sets the colors of videos recorded in the sub recorder.[Grading SEL] Sets the grading function.[MAIN COLOR] is only enabled in [V-Log] mode.[3D LUT] Sets the grading in the [3D LUT].[Grading SEL] is disabled when this is [OFF].When [Grading SEL] is set to [Internal] or [External App]f Loads from the SD memory card using [LOAD].f Saves the setting value to the SD memory card with [SAVE AS].[CDL] Sets the grading in [CDL].[Grading SEL] is disabled when this is [OFF].When [Grading SEL] is set to [Internal] or [External App]f Sets [Slope]/[Offset]/[Power]/[Saturation] on the control panel.f Loads from the SD memory card using [LOAD].f Saves the setting value to the SD memory card with [SAVE AS].