Panasonic WJ-HL208A Operating Instructions Manual

Also see for WJ-HL208/G: Operating instructions

Contents

Panasonic WJ-HL208A Operating Instructions Manual Manual pdf 24 page image

24System SetupGeneralFigure 8: System – General setup screenHighlight the “Site” box and press the button. A virtual keyboard appears that you can use to enter a SiteName. Once you have entered your title, highlight “OK” and press the button.Highlight the box beside “System ID” and press the button. Change the number by highlighting it and usingthe Up and Down arrow buttons to increase and decrease the number from 0 to 99.Note: The System ID number is used to identify the unit when it is connected with cameras throughthe RS485 port.Highlight the box beside “Language” and press button. A drop-down menu displays the availablelanguages. Highlight the desired language and press the button.The box beside “Version” displays the software version of the recorder. To upgrade the software, connecta USB device containing the upgrade package file to the recorder. Highlight “Upgrade…” and press thebutton. The “Upgrade” screen appears. The screen displays the upgrade package file names that areavailable. The “.rui” indicates that the file is for software upgrades and “.ofi” indicates that the file is for opticaldrive firmware upgrades.Figure 9: Upgrade screenSelect the desired file and press the button. Highlighting the “Install” button and pressing the buttonwill install the selected software package. Highlighting the “Cancel” button and pressing the button willclose the window without upgrading the software. If the upgrade package file is not installed on the recorderproperly, you will get an error message.The system restarts automatically after completing the upgrade.Important: The USB device must be FAT16 or FAT32 format.You can import saved recorder settings or export the current recorder settings. To import saved recordersettings, connect the USB device containing the setup file (.dat) to the recorder. Highlight “Setup” – “Import…”and press the button. Select the desired setup file and press the “Import” button to import the selectedsettings and change the recorder settings accordingly.