Panasonic WJ-HL208A Operating Instructions Manual

Also see for WJ-HL208/G: Operating instructions

Contents

Panasonic WJ-HL208A Operating Instructions Manual Manual pdf 33 page image

33Highlighting “Use Panic Recording” and pressing the button toggles between On and Off.Highlight the “Panic Recording” – “Duration” box and set the duration of panic recording. Panic recordingwill stop automatically after the preset duration as long as the [PANIC] button is not pressed to stop thepanic recording. You can set the dwell from 5 minutes to 1 hour. Select “No Limit” if you want to stop panicrecording manually.Highlighting the “Panic Recording” – “ips” and pressing the button allows you to set the images per secondfor Panic recording. You can select from “1.00 ips” to “25.00 ips”.Highlighting the “Panic Recording” – “Quality” and pressing the button allows you to set the recordedimage quality for Panic recording. You can select from: “Very High”, “High”, “Standard” and “Basic”.Highlighting the “Panic Recording” – “Resolution” and pressing the button allows you to set the recorded imageresolution for Panic recording. You can select from: “Very High” (D1), “High” (Half D1) and “Standard” (CIF).Schedule< Simple Mode > < Advanced Mode >Figure 27: Record – Schedule setup screenYou can program the recorder to record only during certain times based on time, day of the week, andholidays. The smallest time segment you can use is 15 minutes.Highlighting “Schedule On” and pressing the button toggles between On and Off. In the Schedule Onmode, the recorder records video based on the schedule established in the Schedule screen. When turningSchedule recording Off, you will be asked to confirm your decision, and “ ” displays at the top-left corner ofeach camera screen. Panic recording will function even when Schedule is turned off. “ ” displays during panicrecording.Highlight the “Schedule Mode” box and press the button. You can select between “Simple Mode” and“Advanced Mode”. Selecting “Advanced Mode” allows you to set up individual recording schedule for eachevent.Note: Changing the schedule mode will reset all event and action statuses.Highlight the “+” and press the button to add a schedule item.Highlight the box under the “Day” heading and press the button to change the days that the scheduledrecording will take place. Choose from: “Sun”, “Mon”, “Tue”, “Wed”, “Thu”, “Fri”, “Sat”, “M~F”, “Hol” and “All”.““““““Highlight the box under the “Range” heading and press the button to change the time range that thescheduled recording will take place. The smallest time segment you can use is 15 minutes.Highlight the box under the “Mode” heading and press the button to change the recording mode that will beused. Choose from: “No Record”, “Time”, “Event” and “Time & Event”. (Simple Mode Only)When the recorder is in the “No Record” mode, it will not record during the preset day and time range as longas the [PANIC] button is not pressed. Use the “No Record” mode when you do NOT want the recorder torecord during certain times.