Panasonic WJ-HL208A Operating Instructions Manual

Also see for WJ-HL208/G: Operating instructions

Contents

Panasonic WJ-HL208A Operating Instructions Manual Manual pdf 34 page image

34When the recorder is in the “Time” mode, the icon displays at the top-left corner of the screen. Therecorder will record and displays the icon at the top-left corner of the screen during the scheduled times.When the recorder is in the “Event” mode, the red icon displays at the top-left corner of the screen. Therecorder will record and displays the icon at the top-left corner of the screen when any event occurs. Whenthe recorder is in the “Pre-Event” recoding mode, the yellow icon displays when there is no event, and therecorder is not recording. When the recorder is in the “Pre-Event” mode, the red and display when anyevent occurs and the recorder starts recoding.When the recorder is in the “Time & Event” mode, the recorder will follow the Time settings and the icondisplays at the top-left corner of the screen. The recorder follows the Event settings and the icon displays.Highlight the box under the “Channels” heading and press the button to select which cameras will berecorded. (Simple Mode Only)Highlight the box under the “Settings” heading and press the button to define the recording settings.“Figure 28: Record – Settings (Advanced Mode) setup screenYou can set the “ips”, “Quality” and “Resolution” (“ips”, “Quality”, “Resolution” and “Dwell” for “AdvancedMode” setup) of the recording for any modes you set up in the “Mode” column. If you do not set the “ips”,“Quality”, “Resolution” and “Dwell” in the “Settings” column, the recorder will follow the default settings. Seebelow for details.Note: Descriptions of the Record icons in the “Type” column are as follows:Time-lapse (Time) Alarm-In MotionVideo Loss Video Blind Text-InChannels that are not defined will use the setting values of the previous schedule item.When multiple events are detected at the same time from a specific channel, the recorder willrecord event video with the high setting values if the “ips”, “Quality”, “Resolution” and “Dwell”values of events are different from each other. However, the “ips” will be reset to the supportedmaximum value when the “ips”, “Quality”, “Resolution” and “Dwell” are all set to the highestvalue. (Advanced Mode Only)