Panasonic WJ-HL208A Operating Instructions Manual

Also see for WJ-HL208/G: Operating instructions

Contents

Panasonic WJ-HL208A Operating Instructions Manual Manual pdf 39 page image

39Highlighting the box under the “Activation Time” heading allows you to set the duration before the recorderwill report a Video Blind. The recorder will not consider any blinded camera to be a Video Blind if the detectedblindness is less than the Activation Time set on this screen.Highlight the box under the “Actions” and press the button. The recorder can be set to react to video blinddifferently for each camera. Each camera can be associated with another camera, trigger an Alarm-Outconnector, sound the recorder’s internal buzzer, notify a number of different devices, move PTZ cameras topreset positions, and/or display a camera on a SPOT monitor.Highlight “Use Ignoring Time” and press the button to toggle between On and Off. When set to On, therecorder will ignore video blind events occurred during the preset period. Highlighting “Time Setup” and pressthe button allows you to set up event ignoring time.Text-InFigure 40: Event – Text-In setup screenThe recorder can be set to react to text input from devices. This screen allows you to configure the recorder foreach text-in device.Highlight the box under the “Setup” heading, and press the button. Selecting the “Setup” heading changesall the parameters excluding Port settings of all the text input channels.Note: The system performance might be affected when a large quantity of text inputs are detectedfrom several channels at the same time.Figure 41: Text-In – Port setup screenHighlight the box beside “Port”, and press the button. Select from “None”, “RS232”, “RS485”, “USB-Serial”(1 – 8) and “LAN” (1 – 16).