Panasonic WJ-HL208A Operating Instructions Manual

Also see for WJ-HL208/G: Operating instructions

Contents

Panasonic WJ-HL208A Operating Instructions Manual Manual pdf 45 page image

45LANFigure 49: Network – LAN setup screenHighlight the box beside “Type” and press the button. You can select the type of network configurationfrom: “Manual” and “DHCP”. Select the desired type and press the button.Selecting “Manual” from the Type allows you to set up LAN parameters manually.Change the numbers by highlighting them and using the Up and Down arrow buttons to increase or decreasethe number.The factory default LAN settings are:pp IP Address: 192.168.0.250pp Gateway: 192.168.0.1pp Subnet Mask: 255.255.255.0Note: You will need to get the appropriate IP Address, Gateway and Subnet Mask from your networkadministrator.Highlight the box beside “DNS Server”. Press the Up and Down arrow buttons to set the IP address of theDNS server.Highlight the “Port Number Setup…” box and press the button. The “Port Number Setup” screen appears.Note: You will need to get the appropriate Port Numbers for Web Browser related program (Status,Callback, Watch and Search) from your network administrator.Figure 50: Port Number Setup screenChange the numbers by highlighting them and using the Up andDown arrow buttons to increase or decrease the number.The factory default Port settings are:pp Remote Status: 8200pp Remote Callback: 8201pp Remote Watch: 8016pp Remote Search: 10019Note: The system restarts automatically after changing the port settings.Do NOT use the same port number for two different programs, otherwise, the recorder cannotbe connected with Web Browser.Important: When changing the port settings, you must change the port settings on Web Browser aswell.Highlight “Use UPnP” and press the button to toggle between On and Off. When it is On, port forwardingfrom the NAT (Network Address Translation) device to the recorder will be enabled automatically via UPnP(Universal Plug and Play) service. This function will be especially useful when accessing a port on a privateIP address.