Panasonic WJ-HL208A Operating Instructions Manual

Also see for WJ-HL208/G: Operating instructions

Contents

Panasonic WJ-HL208A Operating Instructions Manual Manual pdf 30 page image

30Highlight the box in the “Format” column for the desired storage device and pressthe button. You will be able to format the device for recording. When selecting“Not Using” from “Use As” and highlighting the “Format” button, the device willnot be used for recording.Figure 22: Internal 1 (Storage Format) screenNote: The recorder does NOT support USB hard disk drives.The “Information” column displays whether the device is being used or not. “Other” indicates the device hasbeen used for another recorder.Highlight the box in the “Information” column for the desired storage device and press the button.You will be able to check the model name, serial number and the timeinformation about recorded data of the selected storage device.If you want to erase recorded data on the selected device, highlight“Clear” and press the button. You will be asked whether or not youwant to delete the data.Figure 23: Internal 1 (Storage Information) screenImportant: Do NOT disconnect the USB cable or the power from the device while copying video clips.If the USB cable is disconnected while copying video clips, archived data might be lost.System EventFigure 24: System – System Event setup screenThe recorder can be configured to run self-diagnostics and report the results.Highlight the “Settings” box beside the desired event (“System”, “Check Recording”, “Check Alarm-In”, “DiskAlmost Full”, “Disk Bad”, or “Disk Temperature”), and press the button.Highlight the “Settings” box beside “System” and press the button. You can select the interval that youwant the recorder to run self-diagnostics on the system. You can select from “1 hr.” to “30 days” or “Never”.Highlight the “Settings” box beside “Check Recording” and press the button. The “Check Recording”screen appears.