22 PPP Type Connection 2 (NETWORK ACCESS)1. Windows NT Setupq When installed, Remote Access Service appears in thelist of Network Services.In the Network dialog box, choose Remote AccessService, and then click the [Properties] button to dis-play the Remote Access Setup window.w Click the [Configure] button and configure the port inthe Configure Port Usage dialog box. Then click [OK]to return to the Remote Access Setup window of Stepq.e Click the [Network...] button and set the protocolsused in the Network Configuration dialog box as fol-lows:r Check TCP/IP in the Dial out Protocols field.t Check TCP/IP in the Allow remote clients runningfield.y Check Allow any authentication including clear testin the Encryption settings field.If the Dial-Up Networking icon is not in My Computer, it is not installed. You can use the following procedure to install it.(1) Right-click the Network Neighborhood icon on the desktop, and then click Properties in the pull-down menu.(2) In Network dialog box, click the Services tab.(3) If the Remote Access Service is not in the Network Services list, click the [Add] button to display the Select NetworkService dialog box.(4) Choose Remote Access Service, and then click the [OK] button to display the Windows NT Setup dialog box.(5) Click the [Continue] button in the dialog box to install Remote Access Service.WJ-NT104Modem/TACSU/DSUModem/TACSU/DSURS-232CcablePublic linesDial-up server/router etc.LANRS-232CcableCamera (max. 4)PC(Windows95 etc.)

network interface unit

PREFACE

PRECAUTIONS

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS

INSTALLATIONS

SYSTEM CONNECTIONS

PPP (Point to Point Protocol) Type Connection

PREPARATIONS

WJ-NT104 Setup

PPP Type Connection 1 (P to P ACCESS)

PPP Type Connection 2 (NETWORK ACCESS)

MAIN PAGE AND CONTROLS

Operation Modes

Pull Mode and Push Mode

Picture Quality Setup

MAIN PAGE (without Camera Control)

MAIN PAGE (with Camera Control)

ALARM FUNCTION

ALARM Recording

ALARM NOTICE

SETUP PROCEDURES

MODE SETUP

NETWORK SETUP

ALARM SETUP

SERIAL PORT SETUP

MODEM SETUP

USER SETUP

HOST SETUP

FTP CLIENT SETUP

DATE & TIME SETUP

CAMERA MENU SETUP

UTILITY SOFTWARE

ACCESS AUTHORIZATION

Registration

EXTENSION FUNCTIONS

WJ-SX550A/B/C Matrix Switcher Control

WJ-DR200 AV Disk Recorder Control

WJ-HD100 Digital Disk Recorder Control

WJ-HD500 Digital Disk Recorder Control

CONTENTS UPLOAD

CONTROL BY HTML DESCRIPTION

Camera Operation

Alarm Operation

Substitute Character Strings in HTTP Server

TROUBLESHOOTING

PERIPHERALS

SPECIFICATIONS

Panasonic WJ-NT104 Operating Instructions Manual

WJ-NT104

operating instructions

sequence mode