Panasonic WJ-NT104 Operating Instructions Manual

Also see for WJ-NT104: Operating instructions Operating instructions

Contents

Panasonic WJ-NT104 Operating Instructions Manual Manual pdf 72 page image

72CONTENTS UPLOADContents can be uploaded by means of an FTP (FileTransfer Protocol). The following describes how to uploadcontents produced by using a PC. Uploading a FileUpload contents produced by using a PC by the follow-ing procedures.q Click the [Start] button, point to Programs, and thenclick MS-DOS Prompt to open the MS-DOS window.w Enter an FTP command in the MS-DOS window andstart the FTP. Then enter the IP address of the WJ-NT104.C:\CONTENTS>FTP 192.168.0.10e In response to the input request for a user account, login the user at the administrator level (Level 1).User (192.168.0.10 : (none)) : adminr Enter a password.Password:t After finishing the log-in operation, enter “bin” to selecta binary transmission mode.ftp>biny Enter a put command to upload the file.ftp>put upload.htmlu After finishing the transmission, enter “quit” to exit fromthe FTP.ftp>quitNotesTo transmit more than one file at a time, enter “prompt”to release the interactive mode, and follow “mput” ofthe input command with a wild card symbol (for exam-ple, “*”).ftp>promptInteractive mode offftp>mput *.html Content Storage Memory• Content files such as HTML that have been uploadedby means of the FTP are stored in the flash ROM of theWJ-NT104. Hence, they are protected from erasurewhen the power switch is turned off. However, they arereturned to an initial state during version-up operationor if reset after turning on the Mode Setup Switch “2” ofthe WJ-NT104. Be sure to back up the files beforeattempting to conduct such operations.• No directories can be prepared in the content memoryinterior.• Reading of the contents file name is case-sensitive.Storing capacity: Approx. 1.5 Mbytes in totalNumber. of storable files : Max. 650* The above figures are subject to change, depend-ing on file sizes and memory usage.