67 WJ-HD100 Digital Disk Recorder ControlIt is enabled control of the WJ-HD100 disk recorder from the PC via the WJ-NT104 Network Interface Unit. (disabled controlwith PSoData)Also refer to the operating instructions for the disk recorder together. Connections• Fixed input selection modeIn this mode, only images from the MONITOR OUT connector of the disk recorder are available.(1) Connect MONITOR OUT of the disk recorder to VIDEO IN 1 on the rear of the WJ-NT104.(2) Connect the RS-232C ports (of the disk recorder and the WJ-NT104) with a RS-232C cable.LINK RCV XMTOPERATENetwork Interface Unit WJ-NT104HDHDHDHDPCPCPCPCWJ-NT104 (VIDEO IN1)WJ-HD100(MONITOR OUT)OPERATETIMER HDDALARMSUSPENDDAYLIGHTSAVINGSFULLLOCKMEMORY CARD DISPLAY SELECT STOP PLAY RECPUSH– PAUSE SETALARM SEARCH STEP REW/FFPLAY MODE SELECT/ // /SETUP/ESCLCD CONTRASTDigital Disk Recorder WJ-HDRS-232CDB9 DB92 ......................... 33 ......................... 24 ......................... 65 ......................... 56 ......................... 47 ......................... 88 ......................... 7 SetupIn the SERIAL PORT SETUP window, set TYPE under RS-232C to “Serial through”. Set the same communication parame-ters as for the WJ-HD100 disk recorder.In the MODE SETUP window, for VIDEO INPUT SELECTION MODE under OPERATION MODE SELECT, mark FIXEDINPUT SELECTION MODE. Control OperationType the URL http://192.168.0.10/hd1index.html to access the WJ-HD100 CONTROL window for the disk recorder.qwe!5r !6!7!8!9@0@1@2@4tyoui!1!3!2@3 @2!0