46 SERIAL PORT SETUPOn the ADMINISTRATOR SETUP PAGE, click the SERIAL PORT button to display the SERIAL PORT SETUP window.Specify whether to use the RS-232C or RS-485 interface, and set the communication parameters.q TYPE (RS-232C)Set up the RS-232C port usage. Select NONE,MODEM/TA, WJ-SX550A, WJ-FS616, WJ-DR200 orSerial Through.The factory default setting is NONE.w BAUD RATE (RS-232C)Set the baud rate for RS-232C to 300, 1200, 2400,4800, 9600, 14400, 19200, 38400, 57600, or 115200bps can be selected.The factory default setting is 4800 bps.It is recommended that 38400 bps be selected for a 56kbps modem, and 57600 bps when for a TA.e DATA BIT (RS-232C)Set the data bits for RS-232C.The factory default setting is 8 bits.r STOP BIT (RS-232C)Set the stop bit for RS-232C.The factory default setting is 1 bit.t PARITY (RS-232C)Set the parity bit for RS-232C.The factory default setting is NONE.y USE FLOW CONTROL (RS-232C)Set flow control for RS-232C.The factory default setting is NONE.u TYPE (RS-485)Set up the RS-485 port usage. Select NONE or CAM-ERA + WJ-SX550A.The factory default setting is NONE.i BAUD RATE (RS-485)Set the baud rate for RS-485 to 1200, 2400, 4800,9600, 19200, or 38400 bps can be selected.The factory default setting is 4800 bps.o DATA BIT (RS-485)Set the data bits for RS-485.The factory default setting is 8 bits.!0 STOP BIT (RS-485)Set the stop bit for RS-485.The factory default setting is 1 bit.!1 PARITY(RS-485)Set the parity bit for RS-485.The factory default setting is NONE.!2 X ON/X OFF (RS-485)Set flow control for RS-485 (X ON/X OFF).The factory default setting is OFF.!3 DUPLEX MODESet the communication mode for RS-485.The factory default setting is FULL DUPLEX.qwertyuio!0!1!2!3

network interface unit

PREFACE

PRECAUTIONS

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS

INSTALLATIONS

SYSTEM CONNECTIONS

PPP (Point to Point Protocol) Type Connection

PREPARATIONS

WJ-NT104 Setup

PPP Type Connection 1 (P to P ACCESS)

PPP Type Connection 2 (NETWORK ACCESS)

MAIN PAGE AND CONTROLS

Operation Modes

Pull Mode and Push Mode

Picture Quality Setup

MAIN PAGE (without Camera Control)

MAIN PAGE (with Camera Control)

ALARM FUNCTION

ALARM Recording

ALARM NOTICE

SETUP PROCEDURES

MODE SETUP

NETWORK SETUP

ALARM SETUP

SERIAL PORT SETUP

MODEM SETUP

USER SETUP

HOST SETUP

FTP CLIENT SETUP

DATE & TIME SETUP

CAMERA MENU SETUP

UTILITY SOFTWARE

ACCESS AUTHORIZATION

Registration

EXTENSION FUNCTIONS

WJ-SX550A/B/C Matrix Switcher Control

WJ-DR200 AV Disk Recorder Control

WJ-HD100 Digital Disk Recorder Control

WJ-HD500 Digital Disk Recorder Control

CONTENTS UPLOAD

CONTROL BY HTML DESCRIPTION

Camera Operation

Alarm Operation

Substitute Character Strings in HTTP Server

TROUBLESHOOTING

PERIPHERALS

SPECIFICATIONS

Panasonic WJ-NT104 Operating Instructions Manual

WJ-NT104

operating instructions

sequence mode