43 NETWORK SETUPOn the ADMINISTRATOR SETUP PAGE click the NETWORK button to display the NETWORK SETUP window.Select LAN/PPP, and set IP address, netmask, and default gateway.q IP ADDRESS (LAN)Enter the IP address to be used with LAN.The factory default setting is 192.168.0.10.w NETMASK (LAN)Enter the netmask to be used with LAN.The factory default setting is 255.255.255.0.e DEFAULT GATEWAY (LAN)Enter the default gateway to be used with LAN.The factory default setting is 192.168.0.1.r IP ADDRESS (PPP)Enter the IP address to be used with PPP.The factory default setting is 192.168.1.10.t NETMASK (PPP)Enter the netmask to be used with PPP.The factory default setting is 255.255.255.0.y DEFAULT GATEWAY (PPP)Enter the default gateway to be used with PPP.The factory default setting is 192.168.1.1.u REMOTE IP ADDRESSUsed when PPP mode is on P to P ACCESS.Enter the IP address of the PC which calls and access-es the WJ-NT104. The PC's IP address must be set toObtain an IP automatically. The factory default settingis 192. 168. 1.11.i PPP MODE• P to P ACCESS modeTo use this mode, match the IP address of the PCwith the address of the WJ-NT104.• NETWORK ACCESS modeTo use this mode, match the address of the WJ-NT104 with the address of the PC. (Independent ofoutgoing and incoming calls)The factory default setting is P to P ACCESS.o HOSTNAMEEnter the host name.Alarm notice (e-mail) is sent in the host name specifiedhere. The host name you enter may be different fromthat entered for the domain settings (DNS).The factory default setting is WJ-NT104.!0 NETWORK TYPESelect LAN or PPP.If PPP is marked, access via LAN is not possible.qwertyuio!0

network interface unit

PREFACE

PRECAUTIONS

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS

INSTALLATIONS

SYSTEM CONNECTIONS

PPP (Point to Point Protocol) Type Connection

PREPARATIONS

WJ-NT104 Setup

PPP Type Connection 1 (P to P ACCESS)

PPP Type Connection 2 (NETWORK ACCESS)

MAIN PAGE AND CONTROLS

Operation Modes

Pull Mode and Push Mode

Picture Quality Setup

MAIN PAGE (without Camera Control)

MAIN PAGE (with Camera Control)

ALARM FUNCTION

ALARM Recording

ALARM NOTICE

SETUP PROCEDURES

MODE SETUP

NETWORK SETUP

ALARM SETUP

SERIAL PORT SETUP

MODEM SETUP

USER SETUP

HOST SETUP

FTP CLIENT SETUP

DATE & TIME SETUP

CAMERA MENU SETUP

UTILITY SOFTWARE

ACCESS AUTHORIZATION

Registration

EXTENSION FUNCTIONS

WJ-SX550A/B/C Matrix Switcher Control

WJ-DR200 AV Disk Recorder Control

WJ-HD100 Digital Disk Recorder Control

WJ-HD500 Digital Disk Recorder Control

CONTENTS UPLOAD

CONTROL BY HTML DESCRIPTION

Camera Operation

Alarm Operation

Substitute Character Strings in HTTP Server

TROUBLESHOOTING

PERIPHERALS

SPECIFICATIONS

Panasonic WJ-NT104 Operating Instructions Manual

WJ-NT104

operating instructions

sequence mode