61 WJ-SX550A/B/C Matrix Switcher Control Connections(1) Connect the MONITOR OUT connectors on the rear of the WJ-SX550A/B/C to the VIDEO IN connectors 1 to 4 on therear of the WJ-NT104.(2) Connect the RS-232C ports (of WJ-SX550A/B/C and WJ-NT104) with a RS-232C cable. You can also connect theCONTROL DATA port on the rear of the WJ-SX550A/B/C to the RS-485 connectors on the rear of the WJ-NT104.• Random Input Selection ModeFor VIDEO INPUT SELECTION MODE under OPERATION MODE SELECT, mark RANDOM INPUT SELECTION MODE.Unless a user changes channels, the last selected channel is used to continue transmission.The image transfer speed is higher than in Multi Input Selection Mode.O P E R A T EMatrix Switcher WJ-SX 550550LINK RCV XMTOPERATENetwork Interface Unit WJ-NT1041111PCPCPCPCWJ-NT104WJ-SX550A/B/CMON1 MON2MON1 MON2MON1 MON2MON1 MON2MonitorOut 1MonitorOut 2MonitorOut 3MonitorOut 4• Multi Input Selection ModeFor VIDEO INPUT SELECTION MODE under OPERATION MODE SELECT, mark MULTI INPUT SELECTION MODE.This mode switches periodically between multiple channels at high speed so that transmission to two or more usersrequesting different channels is possible.The image transfer speed is lower than in Random Input Selection Mode.O P E R A T EMatrix Switcher WJ-SX 550550LINK RCV XMTOPERATENetwork Interface Unit WJ-NT1041234PCPCPCPCWJ-NT104WJ-SX550A/B/C MonitorOut 1MonitorOut 2MonitorOut 3MonitorOut 4MON1MON2MON3MON4RS-232CDB25 DB98 ...................... 13 ...................... 22 ...................... 320 .................... 47 ...................... 56 ...................... 64 ...................... 75 ...................... 822 .................... 9Data Port (WJ-SX550A/B/C)Pin No. Designation1 Ground2 R(B)3 R(A)4 T(B)5 T(A)6 GroundRS-485R(B) ............ T(B)R(A) ............ T(A)T(B) ............ R(B)T(A) ............ R(A)

network interface unit

PREFACE

PRECAUTIONS

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS

INSTALLATIONS

SYSTEM CONNECTIONS

PPP (Point to Point Protocol) Type Connection

PREPARATIONS

WJ-NT104 Setup

PPP Type Connection 1 (P to P ACCESS)

PPP Type Connection 2 (NETWORK ACCESS)

MAIN PAGE AND CONTROLS

Operation Modes

Pull Mode and Push Mode

Picture Quality Setup

MAIN PAGE (without Camera Control)

MAIN PAGE (with Camera Control)

ALARM FUNCTION

ALARM Recording

ALARM NOTICE

SETUP PROCEDURES

MODE SETUP

NETWORK SETUP

ALARM SETUP

SERIAL PORT SETUP

MODEM SETUP

USER SETUP

HOST SETUP

FTP CLIENT SETUP

DATE & TIME SETUP

CAMERA MENU SETUP

UTILITY SOFTWARE

ACCESS AUTHORIZATION

Registration

EXTENSION FUNCTIONS

WJ-SX550A/B/C Matrix Switcher Control

WJ-DR200 AV Disk Recorder Control

WJ-HD100 Digital Disk Recorder Control

WJ-HD500 Digital Disk Recorder Control

CONTENTS UPLOAD

CONTROL BY HTML DESCRIPTION

Camera Operation

Alarm Operation

Substitute Character Strings in HTTP Server

TROUBLESHOOTING

PERIPHERALS

SPECIFICATIONS

Panasonic WJ-NT104 Operating Instructions Manual

WJ-NT104

operating instructions

sequence mode