56PC (DOS/V)RS-232C cableWJ-NT104Camera Camera Menu SetupThis is software to control the camera menu of the WV-CS654 and CS854 (optional).It allows a user to open the menu of a camera connected to the WJ-NT104 with a coaxial cable and select preset positionand other camera settings. Operationq Connect the RS-232C port on the front of the WJ-NT104 and the RS-232C port of the PC with an RS-232C cable.w Set bits #7 and #9 of the MODE selector to ON position (leave the others on OFF), and then press the RESET button on thefront of the WJ-NT104.e Click the Start button, point to Programs and then WJ-NT104 Utilities. Click Camera Setup.r Select a channel under Camera Select.t Click the [MENU ON/OFF] button, to open the Menu.Should it not appear, click the button repeatedly.y Use [UP], [DOWN], [LEFT], [RIGHT], [ENTER], and [ESC] buttons to select a menu and execute a selected menu item.For menu operations and setup refer to the operation manual of the connected camera.u The [SPECIAL] button is effective only when the cursor points to SPECIAL on the camera menu.i When the [Camera Control] button is depressed, a panel for Coaxial Camera Control appears.PAN/TILT, ZOOM, and FOCUS control are selectable only in the “position setting menu.”o To exit from the setup, press the [EXIT] button.!0 Return all switches on the MODE selector to OFF position and then press the RESET button on the front of the WJ-NT104.This completes setup and return to the normal application mode.

network interface unit

PREFACE

PRECAUTIONS

MAJOR OPERATING CONTROLS AND THEIR FUNCTIONS

INSTALLATIONS

SYSTEM CONNECTIONS

PPP (Point to Point Protocol) Type Connection

PREPARATIONS

WJ-NT104 Setup

PPP Type Connection 1 (P to P ACCESS)

PPP Type Connection 2 (NETWORK ACCESS)

MAIN PAGE AND CONTROLS

Operation Modes

Pull Mode and Push Mode

Picture Quality Setup

MAIN PAGE (without Camera Control)

MAIN PAGE (with Camera Control)

ALARM FUNCTION

ALARM Recording

ALARM NOTICE

SETUP PROCEDURES

MODE SETUP

NETWORK SETUP

ALARM SETUP

SERIAL PORT SETUP

MODEM SETUP

USER SETUP

HOST SETUP

FTP CLIENT SETUP

DATE & TIME SETUP

CAMERA MENU SETUP

UTILITY SOFTWARE

ACCESS AUTHORIZATION

Registration

EXTENSION FUNCTIONS

WJ-SX550A/B/C Matrix Switcher Control

WJ-DR200 AV Disk Recorder Control

WJ-HD100 Digital Disk Recorder Control

WJ-HD500 Digital Disk Recorder Control

CONTENTS UPLOAD

CONTROL BY HTML DESCRIPTION

Camera Operation

Alarm Operation

Substitute Character Strings in HTTP Server

TROUBLESHOOTING

PERIPHERALS

SPECIFICATIONS

Panasonic WJ-NT104 Operating Instructions Manual

WJ-NT104

operating instructions

sequence mode