Note• This camera generates the CSR file in the PEM format.12.3.4 Installation of the server certificateIMPORTANT• If the CSR file is not generated, it is impossible to install the server certificate (security certificate). Forthe installation, the server certificate issued by CA is required.1. Click the [Browse...] button of “CA Certificate - CA Certificate install”.→ The [Open] dialog box will be displayed.2. Select the server certification file and click the [Open] button. Then, click the [Execute] button.→ The server certification will be installed.Note• The host name registered in the installed server certificate will be displayed on “CA Certificate -Information”. Depending on the status of the server certificate, the following are displayed.Indication DescriptionInvalid The server certification is not installed.Common name of the server certificate The server certificate has already been installedand validated.Expired The server certification has already expired.• When the [Confirm] button is clicked, the registered information of the installed server certificatewill be displayed in the “CA Certificate - Confirm” dialog box. (Only “Organizational Unit” will bedisplayed with an asterisk (*).)• When the [Delete] button is clicked, the installed server certificate (security certificate) will bedeleted.• When “HTTPS” is selected for “Connection”, it is impossible to delete the server certificate (securitycertificate).• To change (or update) the server certificate, perform step 1 and 2.IMPORTANT• Before deleting the valid server certificate (security certificate), confirm that there is a backup file onthe PC or another media. The backup file will be required when installing the server certificate again.Operating Instructions 14912 Configuring the network settings [Network]
