10s/ 20s/ 30s/ 1min/ 2min/ 3min/ 5min/ 10min/ 20min/ 30min/ 60min• Default: 1min[HD Extra optical zoom]Select the HD extra optical zoom setting from the following.• On (Max X45): Images can be zoomed in on with the optical zoom (1x - 30x) and the HD extra opticalzoom (higher zoom factors, up to 45x).• Off (Max X30): Does not use the HD extra optical zoom.• Default: On (Max X45)About HD extra optical zoomAmong approx. 2.07 megapixel image capture area of the MOS image sensor, the central part of approx. 0.92megapixels is extracted for shooting. That enables the shooting with a higher zooming effect. When the imagecapture size of 1280x720 or less is applied, the zoom factor can be adjusted up to 45x.[Digital zoom]Select the digital zoom setting from the following.• On (Max X1080): Images can be zoomed in on with the optical zoom (1x - 30x), extra optical zoom (up to45x) and the electronic zoom (higher zoom factors, up to 1080x).• Off: Does not use the digital zoom.• Default: OffNote• When “On (Max X1080)” is selected, digital zooming will stop when the zoom factor has reached 45x.• When the zoom factor is 45x or more, the setting of the preset positions will become unavailable.[Number of Privacy zone]Select the number of privacy zones that can be configured from the following.• 8: Up to 8 privacy zones can be configured.• 32: Up to 32 privacy zones can be configured.• Default: 8Note• A maximum of 8 privacy zones can be displayed on 1 screen simultaneously.[Privacy zone]Select a display type of the privacy zone from the following.• Gray: The privacy zones will be displayed in gray.• Mosaic: The privacy zones will be displayed with a mosaic effect.• Off: Does not display the privacy zones.• Default: Gray[Camera position display]When operating the camera manually, you can select what information to display in the image from thefollowing.• Off: Information is not displayed in the image.• Pan-Tilt degree/Zoom ratio display: The Pan degree/Tilt degree/Zoom ratio display is displayed.• Direction display: Direction display is displayed.• Default: Pan-Tilt degree/Zoom ratio displayNote• When “Pan-Tilt degree/Zoom ratio display” is selected, the Pan-Tilt degree/Zoom ratio display isdisplayed in the position specified in “OSD” on the [Basic] tab. (®page 40)56 Operating Instructions8 Configure the settings relating to images and audio [Image/Audio]
